EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microwave-assisted drying of arabica coffee beans: Coupled drying kinetics, color-based moisture monitoring, and energy assessment

Yuyun Yuniati, Fadjar Kurnia Hartati, Achmad Kusyairi, Mahfud Mahfud

Case Studies in Chemical and Environmental Engineering · 2026-12 · 14 · 101431

DOI: 10.1016/j.cscee.2026.101431 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Case Studies in Chemical and Environmental Engineering, 2026-12. Verfasst von Yuyun Yuniati und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microwave-assisted drying offers rapid moisture removal for agro-industrial products, but real-time monitoring of drying progression remains challenging for industrial scale-up because conventional gravimetric methods are offline, labor-intensive, and unsuitable for continuous control. This study presents a case study on the microwave-assisted drying of Coffea arabica beans under controlled low-temperature conditions of 35–45 °C for 2–22 min. The objectives were to evaluate the drying kinetics, investigate color evolution as a non-destructive indicator of moisture content, and assess the energy and environmental implications of color-based process control. Moisture removal followed a falling-rate regime, indicating that internal moisture diffusion dominated the drying process. Among the evaluated thin-layer models, the Midilli–Kucuk model provided the best fit, with R 2 values higher than 0.99 and the lowest RMSE values. To the best of our knowledge, this study demonstrates that total RGB intensity can be used as a practical proxy for moisture ratio in microwave-dried whole Arabica coffee beans, with R 2 values up to 0.96. Increasing the drying temperature from 35 °C to 45 °C shortened the time required to reach 12 % moisture content and reduced the estimated specific energy consumption by 32.5 %, but it also intensified color degradation. The intermediate temperature of 40 °C provided a more balanced compromise between drying efficiency and color preservation. A color-based feedback control strategy could potentially reduce unnecessary over-drying by 10–15 %, thereby lowering energy consumption and associated CO 2 emissions. These findings show that integrating drying kinetics, image-based color monitoring, and energy assessment provides a practical engineering framework for improving microwave drying of porous biological materials.

Zitieren

APA

Yuniati, Y., Hartati, F. K., Kusyairi, A., & Mahfud, M. (2026). Microwave-assisted drying of arabica coffee beans: Coupled drying kinetics, color-based moisture monitoring, and energy assessment. Case Studies in Chemical and Environmental Engineering, 14, 101431. https://doi.org/10.1016/j.cscee.2026.101431

Vancouver

Yuniati Y, Hartati FK, Kusyairi A, Mahfud M. Microwave-assisted drying of arabica coffee beans: Coupled drying kinetics, color-based moisture monitoring, and energy assessment. Case Studies in Chemical and Environmental Engineering. 2026;14:101431. doi:10.1016/j.cscee.2026.101431

BibTeX
@article{Yuniati2026,
  author = {Yuniati, Yuyun and Hartati, Fadjar Kurnia and Kusyairi, Achmad and Mahfud, Mahfud},
  title = {Microwave-assisted drying of arabica coffee beans: Coupled drying kinetics, color-based moisture monitoring, and energy assessment},
  journal = {Case Studies in Chemical and Environmental Engineering},
  year = {2026},
  volume = {14},
  pages = {101431},
  doi = {10.1016/j.cscee.2026.101431}
}
Kostenlos starten →