EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

P. Hofman, F.P. van der Meer, L.J. Sluys

Composites Part A: Applied Science and Manufacturing · 2024-08 · 183 · 108219

DOI: 10.1016/j.compositesa.2024.108219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composites Part A: Applied Science and Manufacturing, 2024-08. Verfasst von P. Hofman und 2 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Materials innovation institute, Nederlandse Organisatie voor Wetenschappelijk Onderzoek.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A numerical framework for simulating progressive failure under high-cycle fatigue loading is validated against experiments of composite quasi-isotropic open-hole laminates. Transverse matrix cracking and delamination are modeled with a mixed-mode fatigue cohesive zone model, covering crack initiation and propagation. Furthermore, XFEM is used for simulating transverse matrix cracks and splits at arbitrary locations. An adaptive cycle jump approach is employed for efficiently simulating high-cycle fatigue while accounting for local stress ratio variations in the presence of thermal residual stresses. The cycle jump scheme is integrated in the XFEM framework, where the local stress ratio is used to determine the insertion of cracks and to propagate fatigue damage. The fatigue cohesive zone model is based on S-N curves and requires static material properties and only a few fatigue parameters, calibrated on simple fracture testing specimens. The simulations demonstrate a good correspondence with experiments in terms of fatigue life and damage evolution.

Förderung

  • Materials innovation institute
  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek

Zitieren

APA

Hofman, P., Meer, F. V. D., & Sluys, L. (2024). Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios. Composites Part A: Applied Science and Manufacturing, 183, 108219. https://doi.org/10.1016/j.compositesa.2024.108219

Vancouver

Hofman P, Meer FVD, Sluys L. Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios. Composites Part A: Applied Science and Manufacturing. 2024;183:108219. doi:10.1016/j.compositesa.2024.108219

BibTeX
@article{Hofman2024,
  author = {Hofman, P. and Meer, F.P. van der and Sluys, L.J.},
  title = {Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios},
  journal = {Composites Part A: Applied Science and Manufacturing},
  year = {2024},
  volume = {183},
  pages = {108219},
  doi = {10.1016/j.compositesa.2024.108219}
}
Kostenlos starten →