EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Chitosan-based coatings to prevent Nitratidesulfovibrio vulgaris influenced (bio)corrosion on aluminium alloy

Viktoriia Drebezghova, Cyril Cugnet, Susana C M Fernandes, Jean-Charles Dupin, Marion Guignard, Anthony Ranchou-Peyruse, Magali Ranchou-Peyruse, Corinne Nardin

Colloids and Surfaces B: Biointerfaces · 2025-09 · 253 · 114751

DOI: 10.1016/j.colsurfb.2025.114751 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Colloids and Surfaces B: Biointerfaces, 2025-09. Verfasst von Viktoriia Drebezghova und 7 weiteren Autor:innen. Beteiligte Einrichtung: Universite de Pau et des Pays de l'Adour, CNRS, IPREM, Pau, France. Hauptthemen laut MEDLINE: Chitosan, Aluminum, Alloys, Desulfovibrio vulgaris. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carnot Institutes Network.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chitosan, a natural polymer derived from chitin, is widely recognized for its biocompatibility, biodegradability, and in particular antimicrobial properties. This study investigates the effectiveness of chitosan grafted onto aluminium Al 2024 alloy substrates in preventing (bio)corrosion, specifically in the presence of the sulfate-reducing bacterium Nitratidesulfovibrio vulgaris (formerly Desulfovibrio vulgaris), a model organism for biocorrosion. Chitosan-based coatings of micrometer thickness were applied using a dip-coating method, which is easy to implement in industrial settings. The coatings were applied to both mirror-polished aluminum substrates, with and without triethoxysilylpropylsuccinic anhydride (TESPSA) for functionalization. Weight loss analysis, profilometry, epifluorescence microscopy, and X-ray photoelectron spectroscopy (XPS) were conducted on the chitosan-coated aluminium alloy before and after microbial incubation. The results showed that chitosan coatings, particularly those functionalized with TESPSA, significantly reduce (bio)corrosion and microbial growth. Notably, the 2 % w/v chitosan coating demonstrated strong adhesion, with less than 5 % detachment under tape tests and no detachment observed after five weeks of exposure to N. vulgaris, and substantial (bio)corrosion resistance. Epifluorescence microscopy revealed a nearly tenfold decrease in bacterial coverage compared to the uncoated substrate. XPS showed minimal impact from N. vulgaris on the 2 % w/v chitosan-coated aluminium, with a stable C/N ratio of 7.4 + /- 0.2 before and after incubation. Electrochemical corrosion tests indicated that the combination of chitosan coatings and TESPSA functionalization significantly decreases the corrosion rate, despite a minor increase in susceptibility to corrosion. These findings highlight the potential of chitosan-based coatings, especially when paired with surface treatments like TESPSA functionalization, to effectively combat corrosion and (bio)corrosion of aluminum alloys.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ChitosanAluminumAlloysDesulfovibrio vulgarisCoated Materials, BiocompatibleCorrosionSurface PropertiesPhotoelectron Spectroscopy

Stichwörter der Autor:innen

(Bio)corrosionAluminium alloyChitosan coatingSilanizationSulfate reducing bacteria

Substanzen

ChitosanAluminumAlloysCoated Materials, Biocompatible

Autor:innen und Institutionen

  • Universite de Pau et des Pays de l'Adour, CNRS, IPREM, Pau, France.
  • Universite de Pau et des Pays de l'Adour, LaTEP, Pau, France.
  • Universite de Pau et des Pays de l'Adour, CNRS, IPREM, Pau, France. Electronic address: corinne.nardin@univ-pau.fr.

Förderung

  • Carnot Institutes Network

Zitieren

APA

Drebezghova, V., Cugnet, C., Fernandes, S. C. M., Dupin, J. C., Guignard, M., Ranchou-Peyruse, A., Ranchou-Peyruse, M., & Nardin, C. (2025). Chitosan-based coatings to prevent Nitratidesulfovibrio vulgaris influenced (bio)corrosion on aluminium alloy. Colloids and Surfaces B: Biointerfaces, 253, 114751. https://doi.org/10.1016/j.colsurfb.2025.114751

Vancouver

Drebezghova V, Cugnet C, Fernandes SCM, Dupin JC, Guignard M, Ranchou-Peyruse A, et al. Chitosan-based coatings to prevent Nitratidesulfovibrio vulgaris influenced (bio)corrosion on aluminium alloy. Colloids and Surfaces B: Biointerfaces. 2025;253:114751. doi:10.1016/j.colsurfb.2025.114751

BibTeX
@article{Drebezghova2025,
  author = {Drebezghova, Viktoriia and Cugnet, Cyril and Fernandes, Susana C M and Dupin, Jean-Charles and Guignard, Marion and Ranchou-Peyruse, Anthony and Ranchou-Peyruse, Magali and Nardin, Corinne},
  title = {Chitosan-based coatings to prevent Nitratidesulfovibrio vulgaris influenced (bio)corrosion on aluminium alloy},
  journal = {Colloids and Surfaces B: Biointerfaces},
  year = {2025},
  volume = {253},
  pages = {114751},
  doi = {10.1016/j.colsurfb.2025.114751}
}
Kostenlos starten →