Development of bone surrogates by material extrusion-based additive manufacturing to mimic flexural mechanical behaviour and fracture prediction via phase-field approach
Computer Methods and Programs in Biomedicine · 2024
DOI: 10.1016/j.cmpb.2024.108287 ↗Kurz gefasst
Fachartikel in der Zeitschrift Computer Methods and Programs in Biomedicine, 2024. Verfasst von Mario Álvarez-Blanco und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering. Universidad Carlos III de Madrid, Avenida. de la Universidad 30, 28911 Leganés, Madrid, Spain. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Fractures, Bone. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 93 Literaturangaben. Gefördert von: Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Politecnica de Valencia.
Abstract (Originalsprache)
BACKGROUND AND OBJECTIVE: The limited availability of human bone samples for investigation leads to the demand for alternatives. Bone surrogates are crucial in promoting research on the intricate mechanics of osseous tissue. However, solutions are restricted to commercial brands, which frequently fail to faithfully replicate the mechanical response of bone, or oversimplified customised simulants designed for a specific application. The manufacturing and assessment of reliable bone surrogates made of polylactic acid via material extrusion-based additive manufacturing are presented in this work. METHODS: An experimental and numerical study with 3D-printed dog-bone and prismatic specimens was carried out to characterise the polymeric feedstock and analyse the influence of process parameters under three-point bending and quasi-static conditions. Besides, three porcine rib samples were considered as a reference for the development of the artificial bones. Bone surrogates were manufactured from the 3D-scanned real bone geometries. In order to reproduce the trabecular and cortical bone, a lattice structure for the infill and a compact shell surrounding the core were employed. Infill density and shell thickness were evaluated through different printing configurations. Additionally, a computational analysis based on the phase-field approach was conducted to simulate the experimental tests and predict fracture. The modelling considered homogenisation of the infill material. RESULTS: Outcomes demonstrated the potential of the presented methodology. Maximum force and flexural stiffness were compared to real bone properties to find the optimal printing configuration, replicating the flexural mechanical behaviour of bone tissue. Certain configurations accurately reproduce the studied properties. Regarding the numerical model, strength and stiffness prediction was validated with experimental results. CONCLUSIONS: The presented methodology enables the manufacturing of artificial bones with accurate geometries and tailored mechanical properties. Furthermore, the described modelling strategy offers a powerful tool for designing bone surrogates.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Mechanical Engineering. Universidad Carlos III de Madrid, Avenida. de la Universidad 30, 28911 Leganés, Madrid, Spain.
- Institute of Mechanical and Biomechanical Engineering - I2MB, Department of Mechanical Engineering and Materials, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain.
- Department of Mechanical Engineering. Universidad Carlos III de Madrid, Avenida. de la Universidad 30, 28911 Leganés, Madrid, Spain. Electronic address: mimarcoe@ing.uc3m.es.
Förderung
- Ministerio de Ciencia e Innovación
- Generalitat Valenciana
- Universitat Politecnica de Valencia
- European Regional Development Fund
- European Social Fund Plus
- Comunidad de Madrid
- Espana Ministerio de Ciencia e Innovacion
Zitieren
APA
Álvarez-Blanco, M., Infante-García, D., Marco, M., Giner, E., & Miguélez, M. H. (2024). Development of bone surrogates by material extrusion-based additive manufacturing to mimic flexural mechanical behaviour and fracture prediction via phase-field approach. Computer Methods and Programs in Biomedicine. https://doi.org/10.1016/j.cmpb.2024.108287
Vancouver
Álvarez-Blanco M, Infante-García D, Marco M, Giner E, Miguélez MH. Development of bone surrogates by material extrusion-based additive manufacturing to mimic flexural mechanical behaviour and fracture prediction via phase-field approach. Computer Methods and Programs in Biomedicine. 2024. doi:10.1016/j.cmpb.2024.108287
BibTeX
@article{lvarezBlanco2024,
author = {Álvarez-Blanco, Mario and Infante-García, Diego and Marco, Miguel and Giner, Eugenio and Miguélez, M Henar},
title = {Development of bone surrogates by material extrusion-based additive manufacturing to mimic flexural mechanical behaviour and fracture prediction via phase-field approach},
journal = {Computer Methods and Programs in Biomedicine},
year = {2024},
doi = {10.1016/j.cmpb.2024.108287}
}
EUVIMED