EUVIMEDEUVIMED entdecken
Crossref

A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples

Camila Scheid, Sofia Aquino Monteiro, Wendell Mello, Maiara Callegaro Velho, Juliana Dos Santos, Ruy Carlos Ruver Beck, Monique Deon, Josias Merib

Journal of Chromatography A · 2024

DOI: 10.1016/j.chroma.2024.464892 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chromatography A, 2024. Verfasst von Camila Scheid und 7 weiteren Autor:innen. Beteiligte Einrichtung: Programa de Pós-Graduação em Biociências, Universidade Federal de Ciências da Saúde de Porto Alegre, Porto Alegre, RS 90050-170, Brazil. Hauptthemen laut MEDLINE: Water Pollutants, Chemical, Organophosphorus Compounds, Pesticides, Hydrocarbons, Chlorinated. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: CNPq.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, 3D-printing based on fused-deposition modeling (FDM) was employed as simple and cost-effective strategy to fabricate a novel format of rotating-disk sorptive devices. As proof-of-concept, twenty organochlorine and organophosphorus pesticides were determined in water samples through rotating-disk sorptive extraction (RDSE) using honeycomb-like 3D-printed disks followed by gas chromatography coupled to mass spectrometry (GC-MS). The devices that exhibited the best performance were comprised of polyamide + 15 % carbon fiber (PA + 15 % C) with the morphology being evaluated through X-ray microtomography. The optimized extraction conditions consisted of 120 min of extraction using 20 mL of sample at stirring speed of 1100 rpm. Additionally, liquid desorption using 800 µL of acetonitrile for 25 min at stirring speed of 1100 rpm provided the best response. Importantly, the methodology also exhibited high throughput since an extraction/desorption platform that permitted up to fifteen simultaneous extractions was employed. The method was validated, providing coefficients of determination higher than 0.9706 for all analytes; limits of detection (LODs) and limits of quantification (LOQs) ranged from 0.15 to 3.03 μg L-1 and from 0.5 to 10.0 μg L-1, respectively. Intraday precision ranged from 4.01 to 18.73 %, and interday precision varied from 4.83 to 20.00 %. Accuracy was examined through relative recoveries and ranged from 73.29 to 121.51 %. This method was successfully applied to analyze nine groundwater samples from monitoring wells of gas stations in São Paulo. Moreover, the greenness was assessed through AGREEprep metrics, and an overall score of 0.69 was obtained indicating that the method proposed can be considered sustainable.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Water Pollutants, ChemicalOrganophosphorus CompoundsPesticidesHydrocarbons, ChlorinatedLimit of DetectionPrinting, Three-DimensionalGas Chromatography-Mass SpectrometryAdsorption

Stichwörter der Autor:innen

3D-printingGreen analytical chemistryMicroextractionPesticidesRotating-disk sorptive extraction

Substanzen

Water Pollutants, ChemicalOrganophosphorus CompoundsPesticidesHydrocarbons, Chlorinated

Autor:innen und Institutionen

  • Programa de Pós-Graduação em Biociências, Universidade Federal de Ciências da Saúde de Porto Alegre, Porto Alegre, RS 90050-170, Brazil.
  • Faculdade de Farmácia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS 90610-000, Brazil.
  • Programa de Pós-Graduação em Biociências, Universidade Federal de Ciências da Saúde de Porto Alegre, Porto Alegre, RS 90050-170, Brazil; Departamento de Farmacociências, Universidade Federal de Ciências da Saúde de Port…

Förderung

  • CNPq

Zitieren

APA

Scheid, C., Monteiro, S. A., Mello, W., Velho, M. C., Dos Santos, J., Beck, R. C. R., Deon, M., & Merib, J. (2024). A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples. Journal of Chromatography A. https://doi.org/10.1016/j.chroma.2024.464892

Vancouver

Scheid C, Monteiro SA, Mello W, Velho MC, Dos Santos J, Beck RCR, et al. A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples. Journal of Chromatography A. 2024. doi:10.1016/j.chroma.2024.464892

BibTeX
@article{Scheid2024,
  author = {Scheid, Camila and Monteiro, Sofia Aquino and Mello, Wendell and Velho, Maiara Callegaro and Dos Santos, Juliana and Beck, Ruy Carlos Ruver and Deon, Monique and Merib, Josias},
  title = {A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples},
  journal = {Journal of Chromatography A},
  year = {2024},
  doi = {10.1016/j.chroma.2024.464892}
}
Kostenlos starten →