EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating cationic and zwitterionic successive multiple ionic-polymer layer coatings for protein separation by capillary electrophoresis

Laura Dhellemmes, Laurent Leclercq, Henry Frick, Alisa Höchsmann, Norbert Schaschke, Christian Neusüß, Hervé Cottet

Journal of Chromatography A · 2024

DOI: 10.1016/j.chroma.2024.464802 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chromatography A, 2024. Verfasst von Laura Dhellemmes und 6 weiteren Autor:innen. Beteiligte Einrichtung: IBMM, University of Montpellier, CNRS, ENSCM, Montpellier, France. Hauptthemen laut MEDLINE: Polymers, Electrophoresis, Capillary, Quaternary Ammonium Compounds, Polyethylenes. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ANR.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Successive multiple ionic-polymer layers (SMILs) have long since proved their worth in capillary electrophoresis as they ensure stable electroosmotic flow (EOF) and relatively high separation efficiency. Recently, we demonstrated that plotting the plate height (H) against the solute migration velocity (u) enabled a reliable quantitative evaluation of the coating performances in terms of separation efficiency. In this work, various physicochemical and chemical parameters of the SMIL coating were studied and optimized in order to decrease the slope of the ascending part of the H vs u curve, which is known to be controlled by the homogeneity in charge of the coating surface and by the possible residual solute adsorption onto the coating surface. SMILs based on poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium styrene sulfonate) (PSS) were formed and the effect of each polyelectrolyte molar mass and of the number of polyelectrolyte layers (up to 21 layers) was studied. The use of polyethylene imine as an anchoring first layer was considered. More polyelectrolyte couples based on PDADMAC, polybrene, PSS, poly(vinyl sulfate), and poly(acrylic acid) were tested. Finally, zwitterionic polymers based on the poly(α-l-lysine) scaffold were synthesized and used as the last layer of SMILs, illustrating their ability to finetune the EOF, while maintaining good separation efficiency.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolymersElectrophoresis, CapillaryQuaternary Ammonium CompoundsPolyethylenesPolyelectrolytesCationsProteinsPolyethyleneimine

Stichwörter der Autor:innen

Capillary electrophoresisPolyelectrolyte multilayersProtein separationSeparation efficiencyZwitterionic polymers

Substanzen

Polymerspoly-N,N-dimethyl-N,N-diallylammonium chloridePolyelectrolytesCationsProteinsPolyethyleneimineQuaternary Ammonium CompoundsPolyethylenes

Autor:innen und Institutionen

  • IBMM, University of Montpellier, CNRS, ENSCM, Montpellier, France.
  • Faculty of Chemistry, Aalen University, Aalen, Germany.
  • IBMM, University of Montpellier, CNRS, ENSCM, Montpellier, France. Electronic address: herve.cottet@umontpellier.fr.

Förderung

  • ANR

Zitieren

APA

Dhellemmes, L., Leclercq, L., Frick, H., Höchsmann, A., Schaschke, N., Neusüß, C., & Cottet, H. (2024). Investigating cationic and zwitterionic successive multiple ionic-polymer layer coatings for protein separation by capillary electrophoresis. Journal of Chromatography A. https://doi.org/10.1016/j.chroma.2024.464802

Vancouver

Dhellemmes L, Leclercq L, Frick H, Höchsmann A, Schaschke N, Neusüß C, et al. Investigating cationic and zwitterionic successive multiple ionic-polymer layer coatings for protein separation by capillary electrophoresis. Journal of Chromatography A. 2024. doi:10.1016/j.chroma.2024.464802

BibTeX
@article{Dhellemmes2024,
  author = {Dhellemmes, Laura and Leclercq, Laurent and Frick, Henry and Höchsmann, Alisa and Schaschke, Norbert and Neusüß, Christian and Cottet, Hervé},
  title = {Investigating cationic and zwitterionic successive multiple ionic-polymer layer coatings for protein separation by capillary electrophoresis},
  journal = {Journal of Chromatography A},
  year = {2024},
  doi = {10.1016/j.chroma.2024.464802}
}
Kostenlos starten →