EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parametric Modelling and Cost Optimisation of Ethylene Degradation via Vacuum-Ultraviolet Photolysis

Buntu Godongwana, Nina Mntwini, Bongolwetu Mabusela, Patricia Mathabe

Chemical Engineering Research and Design · 2026-11

DOI: 10.1016/j.cherd.2026.11.031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical Engineering Research and Design, 2026-11. Verfasst von Buntu Godongwana und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current study develops a coupled mass and energy balance model for a batch VUV photolysis reactor for the oxidation of ethylene. The input variables are expressed in terms of dimensionless groups. The direct oxidation assumption often used in literature is shown to be a limiting case of indirect oxidation, based on the quasi-steady-state assumption. The resulting system of non-linear differential equations is solved numerically using MATLAB®. Using apple storage as a case study, for the single operating conditions used for quantitative validation (9 W and 90% relative humidity), the model describes the measured temperature response with R 2 = 0.909. The conversion model captures the qualitative progression of degradation but underpredicts conversion at longer reaction times (R 2 = 0.754). The model does not incorporate the effects of hydroxyl radicals produced by the photodissociation of water molecules by ultraviolet light, and therefore does not explicitly represent the impact of humidity or the additional reactions driven by these radicals. A Box-Behnken response surface methodology is used to correlate the effect of relative humidity (0 – 90%), light intensity (3 – 9 W), initial concentration (5 – 50 ppm) to the percentage removal and to estimate the optimisation conditions. A parametric cost optimisation framework is proposed to identify the optimal lamp power that minimises the combined cost of electricity and ethylene-related fruit spoilage. The results demonstrate a trade-off between conversion efficiency and energy consumption. An ideal minimum cost of ethylene treatment was determined for a specified lamp wattage. The developed model provides a quantitative basis for the design and economic evaluation of VUV photolysis systems in postharvest fruit handling applications.

Förderung

  • National Research Foundation

Zitieren

APA

Godongwana, B., Mntwini, N., Mabusela, B., & Mathabe, P. (2026). Parametric Modelling and Cost Optimisation of Ethylene Degradation via Vacuum-Ultraviolet Photolysis. Chemical Engineering Research and Design. https://doi.org/10.1016/j.cherd.2026.11.031

Vancouver

Godongwana B, Mntwini N, Mabusela B, Mathabe P. Parametric Modelling and Cost Optimisation of Ethylene Degradation via Vacuum-Ultraviolet Photolysis. Chemical Engineering Research and Design. 2026. doi:10.1016/j.cherd.2026.11.031

BibTeX
@article{Godongwana2026,
  author = {Godongwana, Buntu and Mntwini, Nina and Mabusela, Bongolwetu and Mathabe, Patricia},
  title = {Parametric Modelling and Cost Optimisation of Ethylene Degradation via Vacuum-Ultraviolet Photolysis},
  journal = {Chemical Engineering Research and Design},
  year = {2026},
  doi = {10.1016/j.cherd.2026.11.031}
}
Kostenlos starten →