Valorisation of mine tailings in blended cement: Material performance and life cycle assessment
Chemosphere · 2026-11 · 414 · 145124
DOI: 10.1016/j.chemosphere.2026.145124 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemosphere, 2026-11. Verfasst von Mohammed Basheer Shahin und 4 weiteren Autor:innen. Beteiligte Einrichtung: Ranbir and Chitra Gupta School of Infrastructure Design and Management, Indian Institute of Technology Kharagpur, West Medinipur, Kharagpur, 721302, …. Hauptthemen laut MEDLINE: Construction Materials, Mining, Industrial Waste. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Portland cement production is a major contributor to global CO2 emissions, while large volumes of mine tailings remain stockpiled as long-term environmental liabilities. This study investigates valorisation of copper mine tailings (CMT) as a supplementary cementitious material within a resource recovery framework. Intrinsic reactivity was quantified using the R3 test and linked to hydration behaviour through isothermal calorimetry, X-ray diffraction, FTIR and scanning electron microscopy, alongside compressive strength evaluation. The CMT exhibited an R3 heat release of 156 J/g, confirming its intrinsic pozzolanic reactivity. Isothermal calorimetry showed that a 10% clinker replacement reduced cumulative heat release by only 2.67%, indicating partial compensation of clinker dilution through filler and pozzolanic effects. A cradle-to-gate life cycle assessment employing system expansion quantified environmental benefits from clinker displacement and avoided tailings storage burdens. Climate change impacts decreased from 0.935 to 0.583 kg CO2-eq with increasing CMT replacement, despite an 1800 km transport distance. Impact reductions were predominantly driven by clinker substitution, with additional gains from mitigating waste accumulation. These findings demonstrate a technically viable pathway for integrating CMT into lower-carbon blended cement.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Ranbir and Chitra Gupta School of Infrastructure Design and Management, Indian Institute of Technology Kharagpur, West Medinipur, Kharagpur, 721302, West Bengal, India; School of Civil and Mechanical Engineering, Curtin…
- School of Civil and Mechanical Engineering, Curtin University, Bentley, Perth, 6102, Western Australia, Australia. Electronic address: subhra.majhi@curtin.edu.au.
- Ranbir and Chitra Gupta School of Infrastructure Design and Management, Indian Institute of Technology Kharagpur, West Medinipur, Kharagpur, 721302, West Bengal, India. Electronic address: swati@infra.iitkgp.ac.in.
- Department of Civil Engineering, Birla Institute of Technology & Science Pilani, Vidya Campus, Pilani, 333031, Rajasthan, India; Department of Civil Engineering, Indian Institute of Technology Kharagpur, West Medinipur,…
- School of Civil and Mechanical Engineering, Curtin University, Bentley, Perth, 6102, Western Australia, Australia. Electronic address: abhijit.mukherjee@curtin.edu.au.
Zitieren
APA
Shahin, M. B., Majhi, S., Maitra, S., Barai, S. V., & Mukherjee, A. (2026). Valorisation of mine tailings in blended cement: Material performance and life cycle assessment. Chemosphere, 414, 145124. https://doi.org/10.1016/j.chemosphere.2026.145124
Vancouver
Shahin MB, Majhi S, Maitra S, Barai SV, Mukherjee A. Valorisation of mine tailings in blended cement: Material performance and life cycle assessment. Chemosphere. 2026;414:145124. doi:10.1016/j.chemosphere.2026.145124
BibTeX
@article{Shahin2026,
author = {Shahin, Mohammed Basheer and Majhi, Subhra and Maitra, Swati and Barai, Sudhirkumar V and Mukherjee, Abhijit},
title = {Valorisation of mine tailings in blended cement: Material performance and life cycle assessment},
journal = {Chemosphere},
year = {2026},
volume = {414},
pages = {145124},
doi = {10.1016/j.chemosphere.2026.145124}
}
EUVIMED