Fresh, mechanical, and microstructural properties of lithium slag concretes
Cement and Concrete Composites · 2024-04 · 148 · 105469
DOI: 10.1016/j.cemconcomp.2024.105469 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cement and Concrete Composites, 2024-04. Verfasst von SM Arifur Rahman und 2 weiteren Autor:innen. Die Arbeit wurde bisher 76-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.
Abstract (Originalsprache)
Lithium slag (LS) is a by-product of the lithium salt purification process, and this can be used as a partial replacement of cement for the production of green concrete by reducing carbon footprint associated with clinker production. The raw-LS is rich in aluminosilicate, containing 77.2 % of SiO 2 + Al 2 O 3 + Fe 2 O 3 , 31.6 % of amorphous phases, and the loss of ignition is 7.8 % at 750 ◦ C, making it a suitable pozzolan by providing 4.8 times higher ion dissolution capacity at 1 day compared to class F fly ash (FA). In this study, fresh properties, mechanical, and microstructural properties of 0 – 60 % cement replaced LS concretes were thoroughly determined with a total binder content of 400 kg/m 3 and water-binder ratio of 0.435, and the properties were compared with the same mix proportion of FA concrete. The results show that 20 – 60 % LS concrete mixes produced normal density concrete within the design slump of 125 ± 25 mm and air content of 2 ± 0.5 %. At 90 days, the average compressive strength, tensile strength, and elastic modulus of 40 % LS concrete were 58.6 MPa, 4.10 MPa, and 39 GPa, respectively, which are higher compared to 40 % FA concrete of 35.5 MPa, 3.0 MPa, and 31.1 GPa, respectively, revealing that LS concrete offers better mechanical strength. However, mechanical strengths decreased significantly beyond 40 % LS incorporation. The experimentally determined 28 days mechanical strengths of 40 % LS concrete were underestimated by ACI 318 and AS 3600 standard equations. The BSE-EDS on the ITZ of fine and coarse aggregate confirmed a consistent development of amorphous and amorphous intermediate hydration products in the development of mechanical properties of LS concrete mixes.
Förderung
- Australian Research Council
Zitieren
APA
Rahman, S. A., Shaikh, F. U. A., & Sarker, P. K. (2024). Fresh, mechanical, and microstructural properties of lithium slag concretes. Cement and Concrete Composites, 148, 105469. https://doi.org/10.1016/j.cemconcomp.2024.105469
Vancouver
Rahman SA, Shaikh FUA, Sarker PK. Fresh, mechanical, and microstructural properties of lithium slag concretes. Cement and Concrete Composites. 2024;148:105469. doi:10.1016/j.cemconcomp.2024.105469
BibTeX
@article{Rahman2024,
author = {Rahman, SM Arifur and Shaikh, Faiz Uddin Ahmed and Sarker, Prabir Kumar},
title = {Fresh, mechanical, and microstructural properties of lithium slag concretes},
journal = {Cement and Concrete Composites},
year = {2024},
volume = {148},
pages = {105469},
doi = {10.1016/j.cemconcomp.2024.105469}
}
EUVIMED