EUVIMEDEUVIMED entdecken
Open Access

A photocured bio-based shape memory thermoplastics for reversible wet adhesion

Yuchao Wu, Changhua Su, Shaoyun Wang, Bujingda Zheng, Alireza Mahjoubnia, Kianoosh Sattari, Hanwen Zhang, James Meister, Guoliang Huang, Jian Lin

Chemical Engineering Journal · 2023-08 · 470 · 144226

DOI: 10.1016/j.cej.2023.144226 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical Engineering Journal, 2023-08. Verfasst von Yuchao Wu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering; University of Missouri, Columbia, Missouri 65211, USA. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: NIBIB NIH HHS, National Science Foundation, National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Development of reversible wet or underwater adhesives remains a grand challenge. Because weakened intermolecular interactions by water molecules or/and low effective contact area cause poor interface to the wet surfaces, which significantly decreases adhesive strength. Herein, a new photocured, bio-based shape memory polymer (SMP) that shows both chemical and structural wet adhesion to various types of surfaces is developed. The SMP is polymerized from three monomers mainly from bio-sources to form linear polymer chains dangled with hydrophobic side chains. The hydrogen acceptor and donor groups in the chains form hydrogen bonding with the surfaces, which is protected by the hydrophobic chains in the interface. The SMP shows tunable phase transition temperature (Tg) of 17-38 °C. In a rubbery state above Tg, the adhesive forms conformable contact with the targeted surfaces. Below Tg, a transition to a glassy state locks the conformed shapes to largely increase the effective contact area. As a result, the adhesive exhibits long-term underwater adhesion of > 15 days with the best adhesion strength of ~ 0.9 MPa. Its applications in leak repair, underwater on-skin sensors were demonstrated. This new, general strategy would pave avenues to designing bio-based, long-lasting, and reversible adhesives from renewable feedstocks for widespread applications.

Schlagwörter

Stichwörter der Autor:innen

biopolymershape lockingshape memorywet adhesion

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering; University of Missouri, Columbia, Missouri 65211, USA.
  • Food Science Program, Division of Food, Nutrition & Exercise Sciences; University of Missouri, Columbia, Missouri 65211, USA.
  • Department of Chemical Engineering; University of Missouri, Columbia, Missouri 65211, USA.
  • Department of Civil and Environmental Engineering; University of Missouri, Columbia, Missouri 65211, USA.

Förderung

  • NIBIB NIH HHS
  • National Science Foundation
  • National Institutes of Health

Zitieren

APA

Wu, Y., Su, C., Wang, S., Zheng, B., Mahjoubnia, A., Sattari, K., Zhang, H., Meister, J., Huang, G., & Lin, J. (2023). A photocured bio-based shape memory thermoplastics for reversible wet adhesion. Chemical Engineering Journal, 470, 144226. https://doi.org/10.1016/j.cej.2023.144226

Vancouver

Wu Y, Su C, Wang S, Zheng B, Mahjoubnia A, Sattari K, et al. A photocured bio-based shape memory thermoplastics for reversible wet adhesion. Chemical Engineering Journal. 2023;470:144226. doi:10.1016/j.cej.2023.144226

BibTeX
@article{Wu2023,
  author = {Wu, Yuchao and Su, Changhua and Wang, Shaoyun and Zheng, Bujingda and Mahjoubnia, Alireza and Sattari, Kianoosh and Zhang, Hanwen and Meister, James and Huang, Guoliang and Lin, Jian},
  title = {A photocured bio-based shape memory thermoplastics for reversible wet adhesion},
  journal = {Chemical Engineering Journal},
  year = {2023},
  volume = {470},
  pages = {144226},
  doi = {10.1016/j.cej.2023.144226}
}
Kostenlos starten →