Design a metamaterial based applicator for hyperthermia cancer treatment
Biomedical Signal Processing and Control · 2025-01 · 99 · 106826
DOI: 10.1016/j.bspc.2024.106826 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomedical Signal Processing and Control, 2025-01. Verfasst von Nitika Sharma und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: Ministry of Electronics and Information technology, Thapar Institute of Engineering and Technology, Science and Engineering Research Board.
Abstract (Originalsprache)
This research describes a metamaterial-based applicator with and without water bolus for cancer treatment. The metamaterial based applicator consists of a double spiral antenna and a slotted square shape artificial magnetic conductor (SSA) structure. The antenna is designed on a low-cost FR4 substrate with dimensions of 32 × 32 × 3.27 mm 3, and the SSA unit cell which behaves as a metamaterial, is designed on an RT-duroid substrate with dimensions of 15 × 15 × 0.76 mm 3 (size of the unit cell). The 4 × 4 unit cells of the SSA structure are optimized to direct the maximum field toward the cancer tissue. The proposed applicator (antenna + SSA structure) is tested for hyperthermia treatment using a heterogeneous phantom (skin, fat, and muscle layers) and the human-mimicked model with an air medium and a water bolus layer. The applicator ’ s performance is evaluated in terms of specific absorption rate (SAR), penetration depth (PD), and effective field size (EFS). Further, thermal analysis is performed, with 1.5 W of input power at the antenna port, and the maximum temperature rise of 44 0 C is obtained. The cancer tissue (tumor) temperature ranges between 41 ◦ C to 45 ◦ C, sufficient for effective hyper-thermia therapy. Finally, the suggested metamaterial based applicator is built and tested in the presence of a phantom and head tissue simulating liquid.
Förderung
- Ministry of Electronics and Information technology
- Thapar Institute of Engineering and Technology
- Science and Engineering Research Board
Zitieren
APA
Sharma, N., Singh, H. S., Khanna, R., Kaur, A., & Agarwal, M. (2025). Design a metamaterial based applicator for hyperthermia cancer treatment. Biomedical Signal Processing and Control, 99, 106826. https://doi.org/10.1016/j.bspc.2024.106826
Vancouver
Sharma N, Singh HS, Khanna R, Kaur A, Agarwal M. Design a metamaterial based applicator for hyperthermia cancer treatment. Biomedical Signal Processing and Control. 2025;99:106826. doi:10.1016/j.bspc.2024.106826
BibTeX
@article{Sharma2025,
author = {Sharma, Nitika and Singh, Hari Shankar and Khanna, Rajesh and Kaur, Amanpreet and Agarwal, Mayank},
title = {Design a metamaterial based applicator for hyperthermia cancer treatment},
journal = {Biomedical Signal Processing and Control},
year = {2025},
volume = {99},
pages = {106826},
doi = {10.1016/j.bspc.2024.106826}
}
EUVIMED