EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anatomically accurate 3D printed prosthetic incus for ossicular chain reconstruction

Masoud Mohseni-Dargah, Christopher Pastras, Payal Mukherjee, Kai Cheng, Khosro Khajeh, Mohsen Asadnia

Bioprinting · 2025-04 · 46 · e00393

DOI: 10.1016/j.bprint.2025.e00393 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioprinting, 2025-04. Verfasst von Masoud Mohseni-Dargah und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 91 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Middle ear disease often leads to ossicular erosion, impairing auditory function and frequently requiring ossicular chain reconstruction (OCR) for hearing restoration. Columella-type prostheses, commonly used in OCR, have shown limited success due to issues such as displacement and extrusion, highlighting the need for more effective solutions. This study introduces a 3D-printed prosthesis anatomically resembling the human incus bone, referred to as the titanium prosthetic incus, as a potential device for OCR. Utilising Finite Element Analysis (FEA), CT imaging, and 3D printing , the prosthesis was numerically evaluated, fabricated, and experimentally tested to assess its mechanical performance and anatomical fit. The prosthetic incus demonstrated ossicular vibration comparable to healthy control ears, effectively transmitting sound energy to the inner ear. The results revealed that the prosthetic incus offers superior sound transmission performance, particularly at low frequencies (below 1000 Hz), when compared to the PORP, with similar performance at higher frequencies. Additionally, the prosthetic incus has the potential to improve overall stability over traditional PORP devices, with a reduced risk of displacement due to its precise anatomical fitting. This study also suggests that the approach of contralateral imaging and individualised 3D printing enhances the customisation and accuracy of OCR procedures, potentially reducing operative time and improving long-term outcomes. Furthermore, the cost-effective nature of 3D printing makes this solution both clinically viable and scalable. This innovative technique holds promise for advancing OCR by providing a durable, patient-specific prosthetic option that enhances sound transmission and surgical success rates for patients with middle ear ossicular erosion.

Zitieren

APA

Mohseni-Dargah, M., Pastras, C., Mukherjee, P., Cheng, K., Khajeh, K., & Asadnia, M. (2025). Anatomically accurate 3D printed prosthetic incus for ossicular chain reconstruction. Bioprinting, 46, e00393. https://doi.org/10.1016/j.bprint.2025.e00393

Vancouver

Mohseni-Dargah M, Pastras C, Mukherjee P, Cheng K, Khajeh K, Asadnia M. Anatomically accurate 3D printed prosthetic incus for ossicular chain reconstruction. Bioprinting. 2025;46:e00393. doi:10.1016/j.bprint.2025.e00393

BibTeX
@article{MohseniDargah2025,
  author = {Mohseni-Dargah, Masoud and Pastras, Christopher and Mukherjee, Payal and Cheng, Kai and Khajeh, Khosro and Asadnia, Mohsen},
  title = {Anatomically accurate 3D printed prosthetic incus for ossicular chain reconstruction},
  journal = {Bioprinting},
  year = {2025},
  volume = {46},
  pages = {e00393},
  doi = {10.1016/j.bprint.2025.e00393}
}
Kostenlos starten →