EUVIMEDEUVIMED entdecken
Crossref

Hand-powered micro-slit–gated microfluidics for concurrent blood typing and hematocrit estimation

Yuh-Shiuan Chien, Chun-Yen Chang, Ping-Yeh Chiu, Chien-Fu Chen

Biosensors and Bioelectronics · 2027

DOI: 10.1016/j.bios.2026.119215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2027. Verfasst von Yuh-Shiuan Chien und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Applied Mechanics, National Taiwan University, Taipei, 106, Taiwan. Hauptthemen laut MEDLINE: Biosensing Techniques, Erythrocytes, Blood Grouping and Crossmatching, Microfluidic Analytical Techniques. Die Arbeit nennt 32 Literaturangaben. Gefördert von: National Taiwan University, National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Blood testing is indispensable for clinical diagnostics, transfusion safety, and emergency interventions, with blood type and hematocrit (HCT) being two critical parameters. Conventional methods, though accurate, require bulky instruments, stable electricity, milliliter-scale samples, and skilled personnel, thereby limiting their utility in decentralized or field-based diagnostics, especially in emergencies or resource-limited settings. Here, we present a microfluidic chip integrated with a hand-powered centrifuge platform (hpFuge) for simultaneous blood typing and HCT estimation using only 3 μL of whole blood in total without electricity. A micro-slit (∼7.5 μm) formed at the channel outlet selectively traps agglutinated red blood cells (RBCs), enabling blood type identification, while the length of RBCs agglutination band serves as a quantitative indicator of HCT. Systematic optimization of microchannel length, curvature radius, and channel depth established design parameters that enhance mixing efficiency, flow stability, and signal readability. Band length correlated linearly with HCT values ranging from 10% to 60%, yielding a correlation coefficient of R2=0.99. Validation using 21 clinical samples demonstrated strong agreement with automated analyzers, with a mean bias of 0.126% and 95% limits of agreement of -0.63% to 0.88%. The assay is completed within 1 min, requires no power or complex instrumentation, and provides reliable results with minimal blood volume. This portable and user-friendly platform shows strong potential as a practical diagnostic solution for challenging healthcare environments.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biosensing TechniquesErythrocytesBlood Grouping and CrossmatchingMicrofluidic Analytical TechniquesLab-On-A-Chip DevicesHumansHematocritEquipment Design

Stichwörter der Autor:innen

Blood analysisCentrifugal microfluidicsElectricity-free deviceEmergency carePoint-of-care diagnosticsRed blood cell agglutination

Autor:innen und Institutionen

  • Institute of Applied Mechanics, National Taiwan University, Taipei, 106, Taiwan.
  • Department of Orthopaedic Surgery, Bone and Joint Research Center, Chang Gung Memorial Hospital, Taoyuan, 333, Taiwan.
  • Institute of Applied Mechanics, National Taiwan University, Taipei, 106, Taiwan; Graduate School of Advanced Technology, National Taiwan University, Taipei, 106, Taiwan. Electronic address: stevechen@ntu.edu.tw.

Förderung

  • National Taiwan University
  • National Science and Technology Council

Zitieren

APA

Chien, Y. S., Chang, C. Y., Chiu, P. Y., & Chen, C. F. (2027). Hand-powered micro-slit–gated microfluidics for concurrent blood typing and hematocrit estimation. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2026.119215

Vancouver

Chien YS, Chang CY, Chiu PY, Chen CF. Hand-powered micro-slit–gated microfluidics for concurrent blood typing and hematocrit estimation. Biosensors and Bioelectronics. 2027. doi:10.1016/j.bios.2026.119215

BibTeX
@article{Chien2027,
  author = {Chien, Yuh-Shiuan and Chang, Chun-Yen and Chiu, Ping-Yeh and Chen, Chien-Fu},
  title = {Hand-powered micro-slit–gated microfluidics for concurrent blood typing and hematocrit estimation},
  journal = {Biosensors and Bioelectronics},
  year = {2027},
  doi = {10.1016/j.bios.2026.119215}
}
Kostenlos starten →