Automation of 3D digital rolling circle amplification using a 3D-printed liquid handler
Biosensors and Bioelectronics · 2024-10 · 261 · 116503
DOI: 10.1016/j.bios.2024.116503 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2024-10. Verfasst von Suyeon Shin und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Engineering, Hanyang University, Seoul, 04763, Republic of Korea. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Biosensing Techniques, Nucleic Acid Amplification Techniques. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Ministry of Education, National Research Foundation of Korea.
Abstract (Originalsprache)
Automation of liquid handling is indispensable to improve throughput and reproducibility in biochemical assays. However, the incorporation of automated systems into laboratory workflows is often hindered by the high cost and complexity associated with building robotic liquid handlers. Here, we report a 3D-printed liquid handler based on a fluidic manifold, thereby obviating the need for complex robotic mechanisms. The fluidic manifold, termed a dispensing and aspirating (DA) device, comprises parallelized multi-pipette structures connected by distribution and aspiration channels, enabling the precise supply and removal of reagents, respectively. Leveraging the versatility of 3D printing, the DA device can be custom-designed and printed to fit specific applications. As a proof-of-principle, we engineered a 3D-printed liquid handler dedicated for 3D digital rolling circle amplification (4DRCA), an advanced biochemical assay involving multiple sample preparation steps such as antibody incubation, cell fixation, nucleic acid amplification, probe hybridization, and extensive washing. We demonstrate the efficacy of the 3D-printed liquid handler to automate the preparation of clinical samples for the simultaneous, in situ analysis of oncogenic protein and transcript markers in B-cell acute lymphoblastic leukemia cells using 4DRCA. This approach provides an effective and accessible solution for liquid handling automation, offering high throughput and reproducibility in biochemical assays.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electronic Engineering, Hanyang University, Seoul, 04763, Republic of Korea.
- Division of Hematology, Department of Internal Medicine, Yonsei University College of Medicine, Seoul, 03722, Republic of Korea.
- Division of Hematology, Department of Internal Medicine, Yonsei University College of Medicine, Seoul, 03722, Republic of Korea. Electronic address: hyunsoocho@yuhs.ac.
- Department of Electronic Engineering, Hanyang University, Seoul, 04763, Republic of Korea; Department of Biomedical Engineering, Hanyang University, Seoul, 04763, Republic of Korea; Department of Healthcare Digital Engi…
Förderung
- Ministry of Education
- National Research Foundation of Korea
Zitieren
APA
Shin, S., Yun, H. G., Chung, H., Cho, H., & Choi, S. (2024). Automation of 3D digital rolling circle amplification using a 3D-printed liquid handler. Biosensors and Bioelectronics, 261, 116503. https://doi.org/10.1016/j.bios.2024.116503
Vancouver
Shin S, Yun HG, Chung H, Cho H, Choi S. Automation of 3D digital rolling circle amplification using a 3D-printed liquid handler. Biosensors and Bioelectronics. 2024;261:116503. doi:10.1016/j.bios.2024.116503
BibTeX
@article{Shin2024,
author = {Shin, Suyeon and Yun, Hyo Geun and Chung, Haerim and Cho, Hyunsoo and Choi, Sungyoung},
title = {Automation of 3D digital rolling circle amplification using a 3D-printed liquid handler},
journal = {Biosensors and Bioelectronics},
year = {2024},
volume = {261},
pages = {116503},
doi = {10.1016/j.bios.2024.116503}
}
EUVIMED