EUVIMEDEUVIMED entdecken
Crossref

Highly selective nanozyme-based glucose sensing platform via construction of artificial recognition sites on gold nanospheres

Jinping Yu, Tao Chen, Xueyun Wen, Hao Shi, Lupeng Wang, Yuanhong Xu

Biosensors and Bioelectronics · 2024-06 · 253 · 116169

DOI: 10.1016/j.bios.2024.116169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2024-06. Verfasst von Jinping Yu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Biomedical Engineering, College of Life Science, Qingdao University, Qingdao, 266071, China. Hauptthemen laut MEDLINE: Nanospheres, Metal Nanoparticles, Biosensing Techniques. Die Arbeit wurde bisher 60-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Taishan Scholar Project of Shandong Province, National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanozymes have been regarded as the ideal alternatives to natural enzymes in bioassays due to their good stability and low cost. However, their applications in sensing usually suffer from poor selectivity. For example, Au-based nanozymes, as a kind of classical glucose oxidase mimic enzyme, could catalyze diverse monosaccharides. Therefore, it is of great necessity and urgency to endow the Au-based nanozymes with enhanced selectivity for the construction of specific glucose sensing platform. In our study, easily recyclable polydopamine (PDA)-supported Au-based nanozymes (PDA@Au NPs) were successfully prepared and could catalyze diverse monosaccharides including glucose, xylose, mannose, and sucrose. To enhance the selectivity of PDA@Au NPs, molecularly imprinted polymers (MIPs) were constructed on the surface of PDA@Au NPs using glucose and boronic acid derivatives as template and functional monomer. Impressively, the catalytic activity of the obtained molecularly imprinted nanozyme (PDA@Au NPs-MIPs) only shows a slight decrease (6.3%) while their selectivity is obviously enhanced (≥230%). Accordingly, the as-prepared sensor achieved the sensitive and selective detection of glucose in the concentration range of 10 μM-1 mM and a low detection limit (LOD) of 0.227 μM (S/N = 3), avoiding the influence of other monosaccharides exited in the sensing solutions to a great extent. As expected, the as-prepared sensors also showed good recovery, and long-term stability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NanospheresMetal NanoparticlesBiosensing TechniquesGoldGlucose

Stichwörter der Autor:innen

Colorimetric methodMolecular imprinting techniqueMonosaccharide detectionNanozyme

Substanzen

GoldGlucose

Autor:innen und Institutionen

  • Institute of Biomedical Engineering, College of Life Science, Qingdao University, Qingdao, 266071, China.
  • Institute of Biomedical Engineering, College of Life Science, Qingdao University, Qingdao, 266071, China. Electronic address: yhxu@qdu.edu.cn.

Förderung

  • Taishan Scholar Project of Shandong Province
  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Yu, J., Chen, T., Wen, X., Shi, H., Wang, L., & Xu, Y. (2024). Highly selective nanozyme-based glucose sensing platform via construction of artificial recognition sites on gold nanospheres. Biosensors and Bioelectronics, 253, 116169. https://doi.org/10.1016/j.bios.2024.116169

Vancouver

Yu J, Chen T, Wen X, Shi H, Wang L, Xu Y. Highly selective nanozyme-based glucose sensing platform via construction of artificial recognition sites on gold nanospheres. Biosensors and Bioelectronics. 2024;253:116169. doi:10.1016/j.bios.2024.116169

BibTeX
@article{Yu2024,
  author = {Yu, Jinping and Chen, Tao and Wen, Xueyun and Shi, Hao and Wang, Lupeng and Xu, Yuanhong},
  title = {Highly selective nanozyme-based glucose sensing platform via construction of artificial recognition sites on gold nanospheres},
  journal = {Biosensors and Bioelectronics},
  year = {2024},
  volume = {253},
  pages = {116169},
  doi = {10.1016/j.bios.2024.116169}
}
Kostenlos starten →