EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Understanding the effect of heating rate on hydrothermal liquefaction: A comprehensive investigation from model compounds to a real food waste

Edoardo Tito, Carlo Alberto Marcolongo, Giuseppe Pipitone, Alessandro H A Monteverde, Samir Bensaid, Raffaele Pirone

Bioresource Technology · 2024

DOI: 10.1016/j.biortech.2024.130446 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioresource Technology, 2024. Verfasst von Edoardo Tito und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy. Hauptthemen laut MEDLINE: Microalgae, Refuse Disposal. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Commission, Ministero dell'Università e della Ricerca.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrothermal liquefaction (HTL) emerges as an efficient technology for converting food waste into biocrude. Among HTL parameters, the impact of heating rate is understudied. This study systematically explores its variation (5-115 K/min) on HTL performance using actual food waste and model compounds representing its constituents. Results revealed that an increase in heating rates significantly impacts HTL performances (+63 % biocrude and -34 % solid with food waste) with short residence times, as slower heating rates imply a longer overall time and a higher kinetic advancement of the reaction. Conversely, with longer residence times, the influence of heating rates becomes negligible, as kinetics during heating times are overshadowed by those at operating temperatures. A subtle effect of heating variation at extended residence time was observed only with carbohydrates. This research emphasizes the utility of a kinetic severity factor (KSF) as a valuable tool for simultaneously considering heating rates, operating times, and temperatures.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MicroalgaeRefuse DisposalFood Loss and WasteFoodTemperatureBiofuelsWaterBiomassHot Temperature

Stichwörter der Autor:innen

BiocrudeFast hydrothermal liquefactionFood wasteHeating rateKinetic severity factor

Substanzen

Food Loss and WasteBiofuelsWater

Autor:innen und Institutionen

  • Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy.
  • Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy. Electronic address: giuseppe.pipitone@polito.it.

Förderung

  • European Commission
  • Ministero dell'Università e della Ricerca

Zitieren

APA

Tito, E., Marcolongo, C. A., Pipitone, G., Monteverde, A. H. A., Bensaid, S., & Pirone, R. (2024). Understanding the effect of heating rate on hydrothermal liquefaction: A comprehensive investigation from model compounds to a real food waste. Bioresource Technology. https://doi.org/10.1016/j.biortech.2024.130446

Vancouver

Tito E, Marcolongo CA, Pipitone G, Monteverde AHA, Bensaid S, Pirone R. Understanding the effect of heating rate on hydrothermal liquefaction: A comprehensive investigation from model compounds to a real food waste. Bioresource Technology. 2024. doi:10.1016/j.biortech.2024.130446

BibTeX
@article{Tito2024,
  author = {Tito, Edoardo and Marcolongo, Carlo Alberto and Pipitone, Giuseppe and Monteverde, Alessandro H A and Bensaid, Samir and Pirone, Raffaele},
  title = {Understanding the effect of heating rate on hydrothermal liquefaction: A comprehensive investigation from model compounds to a real food waste},
  journal = {Bioresource Technology},
  year = {2024},
  doi = {10.1016/j.biortech.2024.130446}
}
Kostenlos starten →