EUVIMEDEUVIMED entdecken
Crossref

Biofabrication and in vivo evaluation of a hybrid osteochondral implant consisting of structurally organised engineered cartilage on a 3D-printed metal scaffold

Marcin Kotlarz, Conor O'Keeffe, Gabriela S Kronemberger, Ross Burdis, Shubhasmin Rana, Nadia Rodriguez, Matthia Bonizzi, Pieter Brama, Daniel J Kelly

Biomaterials · 2026-04 · 327 · 123788

DOI: 10.1016/j.biomaterials.2025.123788 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomaterials, 2026-04. Verfasst von Marcin Kotlarz und 8 weiteren Autor:innen. Beteiligte Einrichtung: Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin, Ireland; Department of Mechanical, …. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Tissue Engineering, Cartilage, Articular. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 90 Literaturangaben. Gefördert von: European Research Council, Research Ireland, Taighde Éireann – Research Ireland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Restoration of the osteochondral unit presents a substantial challenge due to the complex functional demands placed on cartilage and underlying subchondral bone, with each region requiring tailored approaches to ensure successful repair. This study describes a new biofabrication strategy to manufacture a hybrid osteochondral implant for biological joint resurfacing, consisting of structurally organised cartilage engineered on the surface of a 3D-printed titanium alloy scaffold. The biofabrication framework utilises phenotypically distinct bone marrow-derived mesenchymal stromal/stem cell (MSC)- and chondrocyte-based microtissues that are zonally patterned in an attempt to form an articular cartilage layer with a zonal composition and structure that mimics the native tissue. The metallic scaffold was designed with a porous architecture, which in pilot in vivo studies were shown to support tissue formation and osseointegration. Building on this initial work, we next used a co-culture of chondrocytes and MSCs to engineer hyaline cartilage microtissues resistant to calcification, while microtissues generated using only MSCs were used to generate hypertrophic cartilage designed to regenerate the cartilage-bone interface. Spatially patterning these microtissues onto the surface of the metallic lattice scaffold constrained and directed their subsequent growth, resulting in the in vitro development of hyaline cartilage with a biomimetic collagen network. Implantation of this hybrid osteochondral graft in a critically sized caprine osteochondral defect model revealed osseointegration challenges in some animals, potentially contributing to cartilage deterioration and negatively impacting overall joint regeneration. This study highlights that engineering zonally organised osteochondral implants in vitro does not necessarily guarantee their successful performance in vivo, and provides further insight into the multiple challenges that must be addressed to successfully promote synovial joint regeneration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue ScaffoldsTissue EngineeringCartilage, ArticularAnimalsMesenchymal Stem CellsChondrocytesTitaniumCoculture Techniques

Stichwörter der Autor:innen

BiofabricationCartilage self-assemblyMetal scaffoldMicrotissuesOsteochondral defect repair

Substanzen

Titanium

Autor:innen und Institutionen

  • Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin, Ireland; Department of Mechanical, Manufacturing and Biomedical Engineering, School of Engineering, Trini…
  • School of Veterinary Medicine, University College Dublin, Dublin, Ireland.

Förderung

  • European Research Council
  • Research Ireland
  • Taighde Éireann – Research Ireland

Zitieren

APA

Kotlarz, M., O'Keeffe, C., S Kronemberger, G., Burdis, R., Rana, S., Rodriguez, N., Bonizzi, M., Brama, P., & Kelly, D. J. (2026). Biofabrication and in vivo evaluation of a hybrid osteochondral implant consisting of structurally organised engineered cartilage on a 3D-printed metal scaffold. Biomaterials, 327, 123788. https://doi.org/10.1016/j.biomaterials.2025.123788

Vancouver

Kotlarz M, O'Keeffe C, S Kronemberger G, Burdis R, Rana S, Rodriguez N, et al. Biofabrication and in vivo evaluation of a hybrid osteochondral implant consisting of structurally organised engineered cartilage on a 3D-printed metal scaffold. Biomaterials. 2026;327:123788. doi:10.1016/j.biomaterials.2025.123788

BibTeX
@article{Kotlarz2026,
  author = {Kotlarz, Marcin and O'Keeffe, Conor and S Kronemberger, Gabriela and Burdis, Ross and Rana, Shubhasmin and Rodriguez, Nadia and Bonizzi, Matthia and Brama, Pieter and Kelly, Daniel J},
  title = {Biofabrication and in vivo evaluation of a hybrid osteochondral implant consisting of structurally organised engineered cartilage on a 3D-printed metal scaffold},
  journal = {Biomaterials},
  year = {2026},
  volume = {327},
  pages = {123788},
  doi = {10.1016/j.biomaterials.2025.123788}
}
Kostenlos starten →