EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D-printed LEGO®-inspired titanium scaffolds for patient-specific regenerative medicine

Seunghun S Lee, Xiaoyu Du, Thijs Smit, Elisa G Bissacco, Daniel Seiler, Michael de Wild, Stephen J Ferguson

Biomaterials Advances · 2023-11 · 154 · 213617

DOI: 10.1016/j.bioadv.2023.213617 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomaterials Advances, 2023-11. Verfasst von Seunghun S Lee und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Biomechanics, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland. Electronic address: seunglee@ethz.ch. Hauptthemen laut MEDLINE: Titanium, Regenerative Medicine. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Eidgenössische Technische Hochschule Zürich, Horizon 2020, H2020 Marie Skłodowska-Curie Actions.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the recent advances in 3D-printing, it is often difficult to fabricate implants that optimally fit a defect size or shape. There are some approaches to resolve this issue, such as patient-specific implant/scaffold designs based on CT images of the patients, however, this process is labor-intensive and costly. Especially in developing countries, affordable treatment options are required, while still not excluding these patient groups from potential material and manufacturing advances. Here, a selective laser melting (SLM) 3D-printing strategy was used to fabricate a hierarchical, LEGO®-inspired Assemblable Titanium Scaffold (ATS) system, which can be manually assembled in any shape or size with ease. A surgeon can quickly create a scaffold that would fit to the defect right before the implantation during the surgery. Additionally, the direct inclusion of micro- and macroporous structures via 3D-printing, as well as a double acid-etched surface treatment (ST) in the ATS, ensure biocompatibility, sufficient nutrient flow, cell migration and enhanced osteogenesis. Three different structures were designed (non-porous:NP, semi-porous:SP, ultra-porous:UP), 3D-printed with the SLM technique and then surface treated for the ST groups. After analyzing characteristics of the ATS such as printing quality, surface roughness and interconnected porosity, mechanical testing and finite element analysis (FEA) demonstrated that individual and stacked ATS have sufficient mechanical properties to withstand loading in a physiological system. All ATS showed high cell viability, and the SP and UP groups demonstrated enhanced cell proliferation rates compared to the NP group. Furthermore, we also verified that cells were well-attached and spread on the porous structures and successful cell migration between the ATS units was seen in the case of assemblies. The UP and SP groups exhibited higher calcium deposition and RT-qPCR proved higher osteogenic gene expression compared to NP group. Finally, we demonstrate a number of possible medical applications that reveal the potential of the ATS through assembly.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumRegenerative MedicineHumansOsteogenesisProstheses and ImplantsPrinting, Three-Dimensional

Stichwörter der Autor:innen

3D printingAssemblyBone tissue engineeringPatient-specificScaffold

Substanzen

Titanium

Autor:innen und Institutionen

  • Institute for Biomechanics, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland. Electronic address: seunglee@ethz.ch.
  • Institute for Biomechanics, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland.
  • Institute for Medical Engineering and Medical Informatics IM(2), FHNW, Muttenz, Switzerland.

Förderung

  • Eidgenössische Technische Hochschule Zürich
  • Horizon 2020
  • H2020 Marie Skłodowska-Curie Actions

Zitieren

APA

Lee, S. S., Du, X., Smit, T., Bissacco, E. G., Seiler, D., de Wild, M., & Ferguson, S. J. (2023). 3D-printed LEGO®-inspired titanium scaffolds for patient-specific regenerative medicine. Biomaterials Advances, 154, 213617. https://doi.org/10.1016/j.bioadv.2023.213617

Vancouver

Lee SS, Du X, Smit T, Bissacco EG, Seiler D, de Wild M, et al. 3D-printed LEGO®-inspired titanium scaffolds for patient-specific regenerative medicine. Biomaterials Advances. 2023;154:213617. doi:10.1016/j.bioadv.2023.213617

BibTeX
@article{Lee2023,
  author = {Lee, Seunghun S and Du, Xiaoyu and Smit, Thijs and Bissacco, Elisa G and Seiler, Daniel and de Wild, Michael and Ferguson, Stephen J},
  title = {3D-printed LEGO®-inspired titanium scaffolds for patient-specific regenerative medicine},
  journal = {Biomaterials Advances},
  year = {2023},
  volume = {154},
  pages = {213617},
  doi = {10.1016/j.bioadv.2023.213617}
}
Kostenlos starten →