Antimicrobial releasing hydrogel forming microneedles
Biomaterials Advances · 2023-08 · 151 · 213467
DOI: 10.1016/j.bioadv.2023.213467 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomaterials Advances, 2023-08. Verfasst von Joseph G Turner und 4 weiteren Autor:innen. Beteiligte Einrichtung: Materials for Health Lab, Department of Chemical Engineering, University of Bath, Bath BA2 7AY, UK; Centre for Bioengineering and Biomedical Technolo…. Hauptthemen laut MEDLINE: Hydrogels, Anti-Infective Agents. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Society, Abbott Diabetes Care, Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
Hydrogel-forming microneedle arrays as a technique for transdermal drug delivery show promise as an alternative to traditional drug delivery methods. In this work, hydrogel-forming microneedles have been created with effective, controlled delivery of amoxicillin and vancomycin within comparable therapeutic ranges to that of oral delivered antibiotics. Fabrication using reusable 3D printed master templates enabled quick and low-cost hydrogel microneedle manufacturing through micro-molding. By 3D printing at a tilt angle of 45° the resolution of the microneedle tip was improved by double (from ca. 64 μm down to 23 μm). Amoxicillin and vancomycin were encapsulated within the hydrogel's polymeric network through a unique room temperature swell/deswell drug loading method within minutes, eliminating the need for an external drug reservoir. The hydrogel-forming microneedle mechanical strength was maintained, and successful penetration of porcine skin grafts observed with negligible damage to the needles or surrounding skin morphology. Hydrogel swell rate was tailored by altering the crosslinking density, resulting in controlled antimicrobial release for an applicable delivered dosage. The potent antimicrobial properties of the antibiotic-loaded hydrogel-forming microneedles against both Escherichia coli and Staphylococcus aureus, highlights the beneficial use of hydrogel-forming microneedles towards the minimally invasive transdermal drug delivery of antibiotics.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Materials for Health Lab, Department of Chemical Engineering, University of Bath, Bath BA2 7AY, UK; Centre for Bioengineering and Biomedical Technologies (CBio), University of Bath, Bath BA2 7AY, UK.
- Department of Life Sciences, University of Bath, Bath BA2 7AY, UK.
- Centre for Bioengineering and Biomedical Technologies (CBio), University of Bath, Bath BA2 7AY, UK; Department of Electronic and Electrical Engineering, University of Bath, Bath BA2 7AY, UK.
- Materials for Health Lab, Department of Chemical Engineering, University of Bath, Bath BA2 7AY, UK; Centre for Bioengineering and Biomedical Technologies (CBio), University of Bath, Bath BA2 7AY, UK. Electronic address:…
Förderung
- Royal Society
- Abbott Diabetes Care
- Engineering and Physical Sciences Research Council
Zitieren
APA
Turner, J. G., Laabei, M., Li, S., Estrela, P., & Leese, H. S. (2023). Antimicrobial releasing hydrogel forming microneedles. Biomaterials Advances, 151, 213467. https://doi.org/10.1016/j.bioadv.2023.213467
Vancouver
Turner JG, Laabei M, Li S, Estrela P, Leese HS. Antimicrobial releasing hydrogel forming microneedles. Biomaterials Advances. 2023;151:213467. doi:10.1016/j.bioadv.2023.213467
BibTeX
@article{Turner2023,
author = {Turner, Joseph G and Laabei, Maisem and Li, Shuxian and Estrela, Pedro and Leese, Hannah S},
title = {Antimicrobial releasing hydrogel forming microneedles},
journal = {Biomaterials Advances},
year = {2023},
volume = {151},
pages = {213467},
doi = {10.1016/j.bioadv.2023.213467}
}
EUVIMED