EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Passive stem-centering end-effector for controlled residual stem length: Integration and orchard evaluation on a robotic citrus harvesting platform

Brendan Chinnock, Andrei Catalan, Daniel Yang, Nicole Oliva, Alexander Ellis, The Nguyen, Alaeddin Bani Milhim

Smart Agricultural Technology · 2026-12 · 15 · 102646

DOI: 10.1016/j.atech.2026.102646 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Agricultural Technology, 2026-12. Verfasst von Brendan Chinnock und 6 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Economic Development Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fresh-market citrus must be detached with a short residual stem to prevent puncture damage to adjacent fruit during handling and transport. This paper presents a passive stem-centering end-effector that replaces the active two-axis positioning stage of our previous standalone harvester, and its integration with vision-based stem detection and a collaborative manipulator on a mobile platform built from commercially available components. The platform integrates a 6-degree-of-freedom (DoF) collaborative manipulator and an RGB-D vision system based on YOLOv8 instance segmentation, and the end-effector comprises a compliant three-finger gripper, commercial citrus clippers with concave blades, and a V-shaped stem-centering guide. Coordinated manipulator roll and pitch motions guide the stem into the guide toward the base of the blades, which reduces the end-effector mass from 1.5 kg to 0.5 kg and the number of actuators from four to two. In supervised orchard trials on 100 navel oranges, all target fruit were detached; 92% met a residual stem length of less than 10 mm and 52% met the stricter 2 mm requirement, with a mean residual stem length of 3.10 ± 3.34 mm (median 1.81 mm). Fruit without adverse stem or canopy conditions achieved 1.01 ± 0.56 mm, close to the result of the previous active design, whereas longer residual stems were associated with non-uniform stems, extreme stem angles, branching stems, or obstructions. The complete harvesting cycle required 38.6–55.1 s per fruit, depending on manipulator speed. The results indicate that passive stem-centering can provide controlled residual stem length with simpler end-effector hardware.

Förderung

  • Economic Development Administration

Zitieren

APA

Chinnock, B., Catalan, A., Yang, D., Oliva, N., Ellis, A., Nguyen, T., & Milhim, A. B. (2026). Passive stem-centering end-effector for controlled residual stem length: Integration and orchard evaluation on a robotic citrus harvesting platform. Smart Agricultural Technology, 15, 102646. https://doi.org/10.1016/j.atech.2026.102646

Vancouver

Chinnock B, Catalan A, Yang D, Oliva N, Ellis A, Nguyen T, et al. Passive stem-centering end-effector for controlled residual stem length: Integration and orchard evaluation on a robotic citrus harvesting platform. Smart Agricultural Technology. 2026;15:102646. doi:10.1016/j.atech.2026.102646

BibTeX
@article{Chinnock2026,
  author = {Chinnock, Brendan and Catalan, Andrei and Yang, Daniel and Oliva, Nicole and Ellis, Alexander and Nguyen, The and Milhim, Alaeddin Bani},
  title = {Passive stem-centering end-effector for controlled residual stem length: Integration and orchard evaluation on a robotic citrus harvesting platform},
  journal = {Smart Agricultural Technology},
  year = {2026},
  volume = {15},
  pages = {102646},
  doi = {10.1016/j.atech.2026.102646}
}
Kostenlos starten →