EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A standalone photovoltaic/battery energy-powered water quality monitoring system based on narrowband internet of things for aquaculture: Design and implementation

Chaowanan Jamroen, Nontanan Yonsiri, Thitiworada Odthon, Natthakun Wisitthiwong, Sutawas Janreung

Smart Agricultural Technology · 2023-02 · 3 · 100072

DOI: 10.1016/j.atech.2022.100072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Agricultural Technology, 2023-02. Verfasst von Chaowanan Jamroen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 76-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a standalone photovoltaic (PV)/battery energy storage (BES)-powered water quality monitoring system based on the narrowband internet of things (NB-IoT) for aquaculture. (1) A PV/BES system was used as the main energy system of the monitoring system. The PV and BES capacities were optimized to provide uninterrupted electrical energy to the monitoring system, taking into account two techno-economic criteria: a maximum reliability index (RI) and a minimum levelized cost of energy (LCOE). Additionally, sensitivity analyses were conducted to investigate the effects of changes in PV generation and system consumption on the RI to improve the resilience of the PV/BES system. (2) The NB-IoT-based remote monitoring system was developed to aggregate water quality parameters such as dissolved oxygen, potential of hydrogen, temperature, turbidity, and salinity in order to provide early warning of severe water quality. Subsequently, the water quality data were used to calculate the water quality suitability index (WQSI). In addition, electrical measuring devices were installed to measure relevant electrical parameters such as PV power, system consumption, BES power, and state of charge. Grafana was then used to process and visualize these water quality and electrical parameters in real-time for the end-users. The proposed system was tested at an aquaculture pond in Rayong Province, Thailand. From the energy system viewpoint, the optimal techno-economic size of the PV/BES system was determined to be a PV capacity of 50 Wp and a BES capacity of 480 Wh, with an RI of 100% and a minimum LCOE of 0.61 $/kWh. The experimental results revealed that the system could operate continuously and stably without losing power supply. Furthermore, the results demonstrated that the proposed system achieved adequate communication reliability, with a packet loss rate of 0.89%, thereby allowing for reliable near real-time monitoring of the WQSI.

Zitieren

APA

Jamroen, C., Yonsiri, N., Odthon, T., Wisitthiwong, N., & Janreung, S. (2023). A standalone photovoltaic/battery energy-powered water quality monitoring system based on narrowband internet of things for aquaculture: Design and implementation. Smart Agricultural Technology, 3, 100072. https://doi.org/10.1016/j.atech.2022.100072

Vancouver

Jamroen C, Yonsiri N, Odthon T, Wisitthiwong N, Janreung S. A standalone photovoltaic/battery energy-powered water quality monitoring system based on narrowband internet of things for aquaculture: Design and implementation. Smart Agricultural Technology. 2023;3:100072. doi:10.1016/j.atech.2022.100072

BibTeX
@article{Jamroen2023,
  author = {Jamroen, Chaowanan and Yonsiri, Nontanan and Odthon, Thitiworada and Wisitthiwong, Natthakun and Janreung, Sutawas},
  title = {A standalone photovoltaic/battery energy-powered water quality monitoring system based on narrowband internet of things for aquaculture: Design and implementation},
  journal = {Smart Agricultural Technology},
  year = {2023},
  volume = {3},
  pages = {100072},
  doi = {10.1016/j.atech.2022.100072}
}
Kostenlos starten →