EUVIMEDEUVIMED entdecken
Crossref

Biomechanical Analysis of Cement-Screw Technique for Tibial Bone Defects in Total Knee Arthroplasty

Dehua Liu, Qunshan Lu, XueZhou Li, Longzhuo Du, Houyi Sun, Peilai Liu

The Journal of Arthroplasty · 2025

DOI: 10.1016/j.arth.2025.08.004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Arthroplasty, 2025. Verfasst von Dehua Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, Qilu Hospital of Shandong University, Jinan, Shandong, China; Department of Orthopaedics, The First Hospital of Hebei Med…. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Knee, Bone Screws, Bone Cements, Tibia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: The cement-screw technique stands out as an effective method for addressing tibial bone defects in total knee arthroplasty (TKA). However, the absence of consensus regarding the optimal angle for screw implantation poses a challenge. This study aimed to investigate the most suitable screw implantation angle for repairing tibial bone defects in TKA, with a focus on biomechanical considerations. METHODS: The angle of screw implantation was categorized into four groups: 0, 15, 30, and 45° relative to the tibial mechanical axis. Finite-element analysis was used to assess stress distribution and displacement in each group model. Static compression mechanical tests were conducted to evaluate the displacement generated by each group model. In addition, high-cycle fatigue compression tests were performed to assess the displacement and structural stiffness of each group model. RESULTS: The finite-element analysis results indicated that at a screw implantation angle of 15°, the maximum stress on the screw, cement in the defect, prosthesis, and cement under prosthesis is minimized, with the least displacement of the screw. Biomechanical test results demonstrated that a 15° screw implantation angle led to minimum displacement and maximal structural stiffness in the model. CONCLUSIONS: The screw implantation angle of 15° provides a biomechanical advantage in the cement-screw technique context for TKA tibial bone defects.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Arthroplasty, Replacement, KneeBone ScrewsBone CementsTibiaHumansFinite Element AnalysisBiomechanical PhenomenaStress, MechanicalKnee Prosthesis

Stichwörter der Autor:innen

biomechanical testcement-screw techniquefinite-element analysisthree-dimensional (3D) printingtotal knee arthroplasty

Substanzen

Bone Cements

Autor:innen und Institutionen

  • Department of Orthopaedics, Qilu Hospital of Shandong University, Jinan, Shandong, China; Department of Orthopaedics, The First Hospital of Hebei Medical University, Shijiazhuang, Hebei, China.
  • Department of Orthopaedics, Qilu Hospital of Shandong University, Jinan, Shandong, China.

Förderung

  • China Postdoctoral Science Foundation
  • National Natural Science Foundation of China

Zitieren

APA

Liu, D., Lu, Q., Li, X., Du, L., Sun, H., & Liu, P. (2025). Biomechanical Analysis of Cement-Screw Technique for Tibial Bone Defects in Total Knee Arthroplasty. The Journal of Arthroplasty. https://doi.org/10.1016/j.arth.2025.08.004

Vancouver

Liu D, Lu Q, Li X, Du L, Sun H, Liu P. Biomechanical Analysis of Cement-Screw Technique for Tibial Bone Defects in Total Knee Arthroplasty. The Journal of Arthroplasty. 2025. doi:10.1016/j.arth.2025.08.004

BibTeX
@article{Liu2025,
  author = {Liu, Dehua and Lu, Qunshan and Li, XueZhou and Du, Longzhuo and Sun, Houyi and Liu, Peilai},
  title = {Biomechanical Analysis of Cement-Screw Technique for Tibial Bone Defects in Total Knee Arthroplasty},
  journal = {The Journal of Arthroplasty},
  year = {2025},
  doi = {10.1016/j.arth.2025.08.004}
}
Kostenlos starten →