EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

3D-printed penetrating neural probes with maskless metallization and encapsulation

Armin Sedighi, Mehedi Hasan, Xiaoce Feng, Yong Xu

Additive Manufacturing Letters · 2026-07 · 18 · 100408

DOI: 10.1016/j.addlet.2026.100408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Additive Manufacturing Letters, 2026-07. Verfasst von Armin Sedighi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: University of Michigan, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three‑dimensional (3D) printing offers new design freedoms for neural interfaces, but reliable metallization and selective encapsulation on complex geometries remain challenging. We present a fully 3D-printed penetrating neural probe fabricated by two-photon polymerization, enabled by two maskless approaches: trench-guided metal deposition via line-of-sight evaporation to define electrodes and interconnect traces, and capillary-driven SU-8 encapsulation, which self-limits at convex edges to preserve exposed electrode sites. The resulting probe incorporates a 2-mm shank with four mushroom-shaped electrodes and demonstrates robust metallization, reliable electrical isolation, and controlled encapsulation achieved purely through geometric design without lithographic masking. Electrochemical characterization has been performed to confirm electrode’s functionality and integrity, and mechanical testing in 0.6% agarose gel confirms sufficient buckling resistance for insertion. This approach provides a rapid, maskless, and highly customizable route for fabricating penetrating neural probes. More broadly, this approach establishes a scalable, geometry-driven paradigm for functionalizing complex 3D-printed microstructures, extending beyond neural interfaces to a wide range of bioelectronic and microscale devices.

Förderung

  • University of Michigan
  • National Science Foundation

Zitieren

APA

Sedighi, A., Hasan, M., Feng, X., & Xu, Y. (2026). 3D-printed penetrating neural probes with maskless metallization and encapsulation. Additive Manufacturing Letters, 18, 100408. https://doi.org/10.1016/j.addlet.2026.100408

Vancouver

Sedighi A, Hasan M, Feng X, Xu Y. 3D-printed penetrating neural probes with maskless metallization and encapsulation. Additive Manufacturing Letters. 2026;18:100408. doi:10.1016/j.addlet.2026.100408

BibTeX
@article{Sedighi2026,
  author = {Sedighi, Armin and Hasan, Mehedi and Feng, Xiaoce and Xu, Yong},
  title = {3D-printed penetrating neural probes with maskless metallization and encapsulation},
  journal = {Additive Manufacturing Letters},
  year = {2026},
  volume = {18},
  pages = {100408},
  doi = {10.1016/j.addlet.2026.100408}
}
Kostenlos starten →