A practical guide to hydrogel working curves for bioprinting
Additive Manufacturing Letters · 2025-07 · 14 · 100293
DOI: 10.1016/j.addlet.2025.100293 ↗Kurz gefasst
Fachartikel in der Zeitschrift Additive Manufacturing Letters, 2025-07. Verfasst von Rion J. Wendland und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Colorado Boulder, University of Iowa, National Institute of Standards and Technology.
Abstract (Originalsprache)
The working curve is a widely implemented, but presently not standardized, method of assessing resin print-ability for photopolymer additive manufacturing technologies. While the working curve has been studied and refined for plastic resins, application to hydrogel materials used in bioprinting has been limited. Hydrogels present measurement challenges due to their decreased solids content, compliant nature, and significant swelling. Here, adapting lessons learned from interlaboratory studies on plastic working curves, we assess various techniques for hydrogel working curve measurements. Notably, across several formulations with various molecular weights and solids content, hydrogels exhibit near ideal log-linear behavior consistent with the Jacobs model when measured appropriately. However, certain measurement modalities (such as contact-based and rheological) can indicate Jacobs-like behavior, but with systematic errors in the cure depth compared to non-contact optical methods. Overall, this work highlights the challenges when conducting hydrogel working curve measurements and provides several considerations to help further develop and standardize measurements across 3D bioprinting applications.
Förderung
- University of Colorado Boulder
- University of Iowa
- National Institute of Standards and Technology
- National Institutes of Health
Zitieren
APA
Wendland, R. J., Kolibaba, T. J., Worthington, K. S., & Killgore, J. P. (2025). A practical guide to hydrogel working curves for bioprinting. Additive Manufacturing Letters, 14, 100293. https://doi.org/10.1016/j.addlet.2025.100293
Vancouver
Wendland RJ, Kolibaba TJ, Worthington KS, Killgore JP. A practical guide to hydrogel working curves for bioprinting. Additive Manufacturing Letters. 2025;14:100293. doi:10.1016/j.addlet.2025.100293
BibTeX
@article{Wendland2025,
author = {Wendland, Rion J. and Kolibaba, Thomas J. and Worthington, Kristan S. and Killgore, Jason P.},
title = {A practical guide to hydrogel working curves for bioprinting},
journal = {Additive Manufacturing Letters},
year = {2025},
volume = {14},
pages = {100293},
doi = {10.1016/j.addlet.2025.100293}
}
EUVIMED