EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A multilayered Zn/CuSe/Zn heterostructural composite for orthopedic implants: Notable work-hardening, antibacterial, and antitumor properties

Miao Zhang, Yilong Dai, Chaogui Tan, Lin Guo, Jianguo Lin, Yuncang Li, Dechuang Zhang, Cuie Wen

Acta Biomaterialia · 2026-03 · 213 · 757-775

DOI: 10.1016/j.actbio.2026.01.045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Biomaterialia, 2026-03. Verfasst von Miao Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, School of Materials Science and Engineering, Xiangta…. Hauptthemen laut MEDLINE: Anti-Bacterial Agents, Zinc, Antineoplastic Agents, Copper. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 91 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, Key Research and Development Program of Hunan Province of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Building on the well-established antitumor properties of selenium (Se), the incorporation of Se into zinc (Zn)-based composites holds substantial potential for antitumor implant applications. Nevertheless, the pronounced disparity in melting points between Zn and Se renders conventional direct smelting methods impractical for fabricating Zn-Se composites. Furthermore, the prevalent work-softening tendency of Zn-based materials constitutes a major barrier to their clinical translation. Here, we report an effective strategy in which Zn sheets coated with copper selenide (CuSe) powder were used as precursors to fabricate multilayered Zn/CuSe/Zn heterostructural composites through the accumulative roll bonding (ARB) technique, providing a promising approach to overcoming processing challenges. The microstructure of the Zn/CuSe/Zn composite primarily consisted of the η-Zn phase, accompanied by ε-CuZn5 and ZnSe intermetallic compounds. After 14 ARB passes and subsequent annealing treatment, the composite evidenced 246 ± 2 MPa for yield strength, 262 ± 3 MPa for ultimate tensile strength, and 12.2 ± 0.3% for elongation, along with noticeable strain hardening during tensile deformation. The Zn/CuSe/Zn composite samples exhibited a moderate corrosion rate of 60.23 ± 0.26 μm/year in electrochemical testing and a degradation rate of 38.12 ± 3.01 μm/year in Hanks' solution. Although some differences exist between the two results, the overall trend is consistent. The composite displayed strong antibacterial activity against Staphylococcus aureus (S. aureus), evidenced by an inhibition zone diameter of 3.21 ± 0.01 mm and colony-forming unit count of 42 ± 6. Furthermore, the composite exhibited favorable biocompatibility with MC3T3-E1 osteoblastic cells while exerting pronounced growth-inhibiting effects on MG63 osteosarcoma (tumor) cells. The Zn/CuSe/Zn composite demonstrates strong potential for antitumor implant therapy due to its potent overall combination of properties relating to mechanical characteristics, degradation capability, and biofunctionality. STATEMENT OF SIGNIFICANCE: This work reports the fabrication of multilayered Zn/CuSe/Zn heterostructural composites via the accumulative roll bonding (ARB) technique which exhibit notable biocompatibility, bone-regenerating properties, as well as antibacterial and antitumor capabilities. After 14 ARB cycles followed by annealing treatment, the Zn/CuSe/Zn composite material demonstrated significant work-hardening behavior, achieving a yield strength of ∼246 MPa, an ultimate tensile strength of ∼262 MPa, an elongation of ∼12.2%, and a moderate degradation rate of 38.12 ± 3.01 μm/year. Furthermore, the composite exhibited pronounced antibacterial activity against S. aureus, promoted osteogenic differentiation in pre-osteogenic MC3T3-E1 cells, and displayed remarkable antitumor efficacy against MG63 osteosarcoma cells. Owing to its suitable mechanical performance and multifunctional biological properties, this multilayered Zn/CuSe/Zn heterostructural composite holds considerable promise for orthopedic applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Anti-Bacterial AgentsZincAntineoplastic AgentsCopperProstheses and ImplantsAnimalsMiceStaphylococcus aureusHumansCell Line, TumorMicrobial Sensitivity TestsMaterials TestingTensile Strength

Stichwörter der Autor:innen

Antibacterial propertyBiodegradabilityLayered heterostructureWork hardeningZn/CuSe/Zn composite

Substanzen

Anti-Bacterial AgentsZincAntineoplastic AgentsCopper

Autor:innen und Institutionen

  • Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China.
  • Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China. Electronic address: daiyilong@xt…
  • Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China.
  • Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria 3001, Australia.
  • Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China. Electronic address: dczhang@xtu.edu.cn.
  • Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria 3001, Australia. Electronic address: cuie.wen@rmit.edu.au.

Förderung

  • Australian Research Council
  • Key Research and Development Program of Hunan Province of China
  • National Natural Science Foundation of China
  • Key Project of Research and Development Plan of Hunan Province

Zitieren

APA

Zhang, M., Dai, Y., Tan, C., Guo, L., Lin, J., Li, Y., Zhang, D., & Wen, C. (2026). A multilayered Zn/CuSe/Zn heterostructural composite for orthopedic implants: Notable work-hardening, antibacterial, and antitumor properties. Acta Biomaterialia, 213, 757-775. https://doi.org/10.1016/j.actbio.2026.01.045

Vancouver

Zhang M, Dai Y, Tan C, Guo L, Lin J, Li Y, et al. A multilayered Zn/CuSe/Zn heterostructural composite for orthopedic implants: Notable work-hardening, antibacterial, and antitumor properties. Acta Biomaterialia. 2026;213:757-775. doi:10.1016/j.actbio.2026.01.045

BibTeX
@article{Zhang2026,
  author = {Zhang, Miao and Dai, Yilong and Tan, Chaogui and Guo, Lin and Lin, Jianguo and Li, Yuncang and Zhang, Dechuang and Wen, Cuie},
  title = {A multilayered Zn/CuSe/Zn heterostructural composite for orthopedic implants: Notable work-hardening, antibacterial, and antitumor properties},
  journal = {Acta Biomaterialia},
  year = {2026},
  volume = {213},
  pages = {757--775},
  doi = {10.1016/j.actbio.2026.01.045}
}
Kostenlos starten →