Zinc-based subcuticular absorbable staples: An in vivo and in vitro study
Acta Biomaterialia · 2023
DOI: 10.1016/j.actbio.2023.06.030 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Biomaterialia, 2023. Verfasst von Nan Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Queensland Centre for Advanced Materials Processing and Manufacturing (AMPAM) School of Mechanical and Mining Engineering, Advanced Engineering Build…. Hauptthemen laut MEDLINE: Zinc, Wound Healing. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Australian Research Council.
Abstract (Originalsprache)
A zinc-nutrient element alloy (Zn-1.0Cu-0.5Ca) was developed into subcuticular absorbable staples (SAS) as a robust alternative to the commercially available poly(l-lactide-co-glycolide) (PLGA) SAS for the first time. The fixation properties of the Zn SAS were measured via pull-out tests and in-situ lap-shear pull-out test comparatively against the PLGA SAS. The Zn SAS exhibited fixation force of 18.9±0.2 N, which was over three times higher than that of PLGA SAS (5.5±0.1 N). The Zn SAS was used to close incision wounds in a SD rat model for biodegradability and biocompatibility characterisation at 1, 4 and 12 weeks. The Zn SAS showed uniform degradation behaviour after in vivo implantation at the average rate of 198±54, 112±28, and 70±24 μm/y after 1, 4, and 12 weeks, which reduced the fixation force to 16.8±1.1 N, 15.4±0.9 N, 12.7±0.7 N, respectively. These findings showed the potential of the Zn SAS for the closure of heavy loading and slowing healing tissues. The Zn SAS enabled successful closure and healing of the incision wound, similar to the PLGA staples. However, the slow long-term degradation rate of the Zn SAS may lead to unnecessary implant retention. In addition, the alloy SAS resulted in higher local foreign body responses due to their stiffness. Reducing the implant cross-section profile and applying low stiffness and a corrosion-accelerating coating are suggested as possible approaches to reduce post-service implant retention and improve the biocompatibility of the Zn SAS. STATEMENT OF SIGNIFICANCE: This work reports the fabrication of the first metallic subcuticular absorbable staples (SAS) made from ZnCuCa alloy for skin wound closure applications. The Zn-based SAS were characterised in vitro and in vivo (SD rat model) for biodegradability, fixation properties, biocompatibility and inflammatory responses, which were compared against the commercially available PLGA-based SAS. The Zn-based SAS provided a secure attachment of the full-thickness wounds on SD rats and allowed successful healing during the 12-week service period. In addition, the in vitro results showed that the Zn-based SAS provided more than three times higher fixation strength than the commercial PLGA, indicating the potential of the Zn-based SAS for load-bearing wound closure application.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Queensland Centre for Advanced Materials Processing and Manufacturing (AMPAM) School of Mechanical and Mining Engineering, Advanced Engineering Building, Bld 49, The University of Queensland, Staff House Rd, St Lucia QL…
- School of Veterinary Science, The University of Queensland, Gatton, QLD 4343, Australia.
- The University of Queensland, Biological Resources, Brisbane, QLD, 4072, Australia.
Förderung
- Australian Research Council
Zitieren
APA
Yang, N., Venezuela, J., Allavena, R., Lau, C., & Dargusch, M. (2023). Zinc-based subcuticular absorbable staples: An in vivo and in vitro study. Acta Biomaterialia. https://doi.org/10.1016/j.actbio.2023.06.030
Vancouver
Yang N, Venezuela J, Allavena R, Lau C, Dargusch M. Zinc-based subcuticular absorbable staples: An in vivo and in vitro study. Acta Biomaterialia. 2023. doi:10.1016/j.actbio.2023.06.030
BibTeX
@article{Yang2023,
author = {Yang, Nan and Venezuela, Jeffrey and Allavena, Rachel and Lau, Cora and Dargusch, Matthew},
title = {Zinc-based subcuticular absorbable staples: An in vivo and in vitro study},
journal = {Acta Biomaterialia},
year = {2023},
doi = {10.1016/j.actbio.2023.06.030}
}
EUVIMED