EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sampling and quantification method for the analysis of disinfectant biocide residues on industrial food contact surfaces by liquid chromatography-mass spectrometry

Kahina Slimani, Robin Bofinger, Yvette Pirotais, Dominique Hurtaud-Pessel

Analytica Chimica Acta · 2026-12 · 1427 · 346373

DOI: 10.1016/j.aca.2026.346373 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytica Chimica Acta, 2026-12. Verfasst von Kahina Slimani und 3 weiteren Autor:innen. Beteiligte Einrichtung: ANSES, French Agency for Food, Environmental and Occupational Health & Safety, Fougères Laboratory, Fougères, France. Electronic address: kahina.slim…. Hauptthemen laut MEDLINE: Disinfectants, Quaternary Ammonium Compounds, Food Contamination. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNIEL.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: Cleaning and disinfection protocols are routinely applied in the agri-food industry to control the microbiological burden of food-contact surfaces and ensure consumer safety. Quaternary ammonium compounds (QACs) and N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine (AMPD) are widely used for this purpose. However, existing methods for the detection of biocide residues on food-contact surfaces rely on colorimetric or spectrophotometric approaches that lack the sensitivity and specificity required for regulatory monitoring. To date, no LC-MS/MS-based surface sampling method covering both QACs and AMPD on stainless steel has been reported. RESULTS: A systematic comparison of sampling vectors, impregnation solvents, and extraction conditions identified the cloth impregnated with an ethanol/water mixture as the optimal approach. Recovery yields ranged from 63 to 90% for QACs, while AMPD showed lower and more condition-dependent recoveries. LC-MS/MS quantification was validated according to NF V03-110 guidelines, with LODs of 1.5 μg L-1 and LOQs of 5 μg L-1 for all analytes. Trueness and precision met the 20% criterion except for the intermediate precision of ADEBAC-C14 at the lowest validation level (26.5%). Recovery of QACs remained comparatively stable across food-soiling conditions, whereas AMPD recovery varied markedly according to the food debris present, highlighting substance-specific sampling constraints. SIGNIFICANCE: This work provides the first LC-MS/MS-based approach covering both QACs and AMPD on food-contact surfaces, combining an experimentally characterized surface-sampling procedure with validated LC-MS/MS quantification. Applied under real-world conditions, the approach identified critical areas prone to residue accumulation and provides a practical and specific analytical tool to support surface hygiene control in the agri-food sector.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

DisinfectantsQuaternary Ammonium CompoundsFood ContaminationLiquid Chromatography-Mass SpectrometryStainless SteelTandem Mass SpectrometrySurface Properties

Stichwörter der Autor:innen

Disinfectant biocidesFood-contact surfacesLC-MS/MSMulti-residue analysisQuaternary ammonium compoundsStainless steelSurface sampling

Substanzen

DisinfectantsQuaternary Ammonium CompoundsStainless Steel

Autor:innen und Institutionen

  • ANSES, French Agency for Food, Environmental and Occupational Health & Safety, Fougères Laboratory, Fougères, France. Electronic address: kahina.slimani@anses.fr.
  • ANSES, French Agency for Food, Environmental and Occupational Health & Safety, Fougères Laboratory, Fougères, France.

Förderung

  • CNIEL

Zitieren

APA

Slimani, K., Bofinger, R., Pirotais, Y., & Hurtaud-Pessel, D. (2026). Sampling and quantification method for the analysis of disinfectant biocide residues on industrial food contact surfaces by liquid chromatography-mass spectrometry. Analytica Chimica Acta, 1427, 346373. https://doi.org/10.1016/j.aca.2026.346373

Vancouver

Slimani K, Bofinger R, Pirotais Y, Hurtaud-Pessel D. Sampling and quantification method for the analysis of disinfectant biocide residues on industrial food contact surfaces by liquid chromatography-mass spectrometry. Analytica Chimica Acta. 2026;1427:346373. doi:10.1016/j.aca.2026.346373

BibTeX
@article{Slimani2026,
  author = {Slimani, Kahina and Bofinger, Robin and Pirotais, Yvette and Hurtaud-Pessel, Dominique},
  title = {Sampling and quantification method for the analysis of disinfectant biocide residues on industrial food contact surfaces by liquid chromatography-mass spectrometry},
  journal = {Analytica Chimica Acta},
  year = {2026},
  volume = {1427},
  pages = {346373},
  doi = {10.1016/j.aca.2026.346373}
}
Kostenlos starten →