EUVIMEDEUVIMED entdecken
Crossref

Electromembrane extraction using deep eutectic solvent-supported liquid membranes in a 3D-printed multi-compartment device for multi-class pharmaceutical analysis in wastewater

César Castro-García, Arianna Palermo, Verónica Rodríguez-Saldaña, Edwin Palacio, Luz O Leal-Quezada, Laura Ferrer

Analytica Chimica Acta · 2026

DOI: 10.1016/j.aca.2025.345016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytica Chimica Acta, 2026. Verfasst von César Castro-García und 5 weiteren Autor:innen. Beteiligte Einrichtung: Environmental Analytical Chemistry Group, University of Balearic Islands, Cra. Valldemossa 7.5 km, 07122, Palma de Mallorca, Spain; Centro de Investi…. Hauptthemen laut MEDLINE: Wastewater, Deep Eutectic Solvents, Membranes, Artificial, Printing, Three-Dimensional. Die Arbeit nennt 40 Literaturangaben. Gefördert von: Centro de Investigación en Materiales Avanzados, Secretaría de Ciencia, Humanidades, Tecnología e Innovación, Spain Ministry of Science Innovation and Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a novel approach for the simultaneous microextraction of six pharmaceutical products based on the use of three different deep eutectic solvents (DES) as supported liquid membranes (SLM), exploiting a custom-designed 3D-printed multi-compartment device for the electromembrane extraction (EME) and subsequent ultra-high-performance liquid chromatography-diode array detector (UHPLC-DAD) analysis. Three DES were synthesized and characterized, combining menthol with aliphatic acids in a 2:1 molar ratio. Thus, menthol:heptanoic acid was used for the extraction of tetracycline (TET) and ampicillin (AMP), menthol:octanoic acid for ciprofloxacin (CIP) and sulfamethoxazole (SMX), while menthol:decanoic acid was used for the extraction of diclofenac (DIC) and ibuprofen (IBU). The simultaneous extraction was optimized by evaluating key parameters such as extraction time, applied voltage, agitation speed, DES volume, buffer composition, and pH in both the donor and acceptor phases. Under optimal conditions, the method achieved limits of detection ranging from 0.05 to 0.4 μg L-1, with enrichment factors between 10.7 and 13.1. The proposed methodology was satisfactorily applied to wastewater samples, obtaining high relative recoveries (83-102 %) and good reproducibility (precision

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

WastewaterDeep Eutectic SolventsMembranes, ArtificialPrinting, Three-DimensionalWater Pollutants, ChemicalElectrochemical TechniquesPharmaceutical PreparationsChromatography, High Pressure LiquidSolvents

Stichwörter der Autor:innen

3D-printed deviceDeep eutectic solventElectromembrane extractionPharmaceutical productsSupported liquid membraneUHPLC-DAD

Substanzen

WastewaterPharmaceutical PreparationsDeep Eutectic SolventsMembranes, ArtificialWater Pollutants, ChemicalSolvents

Autor:innen und Institutionen

  • Environmental Analytical Chemistry Group, University of Balearic Islands, Cra. Valldemossa 7.5 km, 07122, Palma de Mallorca, Spain; Centro de Investigación en Materiales Avanzados, S.C. (CIMAV), Av. Miguel de Cervantes…
  • Environmental Analytical Chemistry Group, University of Balearic Islands, Cra. Valldemossa 7.5 km, 07122, Palma de Mallorca, Spain.
  • Centro de Investigación en Materiales Avanzados, S.C. (CIMAV), Av. Miguel de Cervantes 120, Complejo Industrial Chihuahua, Chihuahua, 31136, Mexico.
  • Centro de Investigación en Materiales Avanzados, S.C. (CIMAV), Av. Miguel de Cervantes 120, Complejo Industrial Chihuahua, Chihuahua, 31136, Mexico. Electronic address: luz.leal@cimav.edu.mx.

Förderung

  • Centro de Investigación en Materiales Avanzados
  • Secretaría de Ciencia, Humanidades, Tecnología e Innovación
  • Spain Ministry of Science Innovation and Universities

Zitieren

APA

Castro-García, C., Palermo, A., Rodríguez-Saldaña, V., Palacio, E., Leal-Quezada, L. O., & Ferrer, L. (2026). Electromembrane extraction using deep eutectic solvent-supported liquid membranes in a 3D-printed multi-compartment device for multi-class pharmaceutical analysis in wastewater. Analytica Chimica Acta. https://doi.org/10.1016/j.aca.2025.345016

Vancouver

Castro-García C, Palermo A, Rodríguez-Saldaña V, Palacio E, Leal-Quezada LO, Ferrer L. Electromembrane extraction using deep eutectic solvent-supported liquid membranes in a 3D-printed multi-compartment device for multi-class pharmaceutical analysis in wastewater. Analytica Chimica Acta. 2026. doi:10.1016/j.aca.2025.345016

BibTeX
@article{CastroGarca2026,
  author = {Castro-García, César and Palermo, Arianna and Rodríguez-Saldaña, Verónica and Palacio, Edwin and Leal-Quezada, Luz O and Ferrer, Laura},
  title = {Electromembrane extraction using deep eutectic solvent-supported liquid membranes in a 3D-printed multi-compartment device for multi-class pharmaceutical analysis in wastewater},
  journal = {Analytica Chimica Acta},
  year = {2026},
  doi = {10.1016/j.aca.2025.345016}
}
Kostenlos starten →