EUVIMEDEUVIMED entdecken
Crossref

One-pot fabrication of highly stable and luminescent InP quantum dots nanobeads through multifunctional polymer encapsulation for lateral flow immunoassay

Xinxin Chen, Qingbiao Zheng, Xiaoquan Li, Li Wang, Lifang Zhang, Yuxin Zhang, Lei Wang, Yanbing Lv, Lin Song Li, Ruili Wu

Analytica Chimica Acta · 2026-01 · 1383 · 344924

DOI: 10.1016/j.aca.2025.344924 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytica Chimica Acta, 2026-01. Verfasst von Xinxin Chen und 9 weiteren Autor:innen. Beteiligte Einrichtung: Henan Province Engineering Technology Research Center of Rapid-Accuracy Medical Diagnostics, Department of Clinical Laboratory, The First Affiliated …. Hauptthemen laut MEDLINE: Quantum Dots, Phosphines, Indium, Polymers. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Henan Provincial Science and Technology Research Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: Lateral flow immunoassay (LFIA) with the advantages of simplicity, rapidness, and low cost have been a prominent point-of-care test (POCT) technology in invitro diagnostics (IVD). Quantum dots (QDs) based-LFIA have attracted strong attention due to higher sensitivity and quantitative capabilities. Developing the less toxic InP QDs, the most promising candidate for Cd-based QDs, can advance their practical applications in industrial products. However, the use of InP QDs as fluorescence label in LFIA is limited by their unstable and poor luminescent properties due to their highly susceptibility towards O2 and H2O. RESULTS: We developed a one-pot approach to fabricate InP nanobeads (InP QBs) by emulsion evaporation and multifunctional polymer encapsulation. After the InP@DTAB nanobeads formed by emulsion-solvent evaporation with dodecyl trimethylammonium bromide (DTAB), the InP@DTAB nanobeads were encapsulated with PVP and carboxyl PEG. This method not only minimizes fluorescence loss caused by defects in multi-step reactions but also directly introduces carboxyl groups, facilitating subsequent conjugation with biomolecules. The prepared InP QBs showed high brightness, good alkaline resistance, photostability and thermal stability. Subsequently, the InP QBs was used as labels in LFIA for detection of C-reactive protein (CRP) and N-terminal pro-B-type natriuretic peptide (NT-proBNP), achieving lower detection limits of 0.67 ng/mL for CRP and 0.003 ng/mL for NT-proBNP. The InP QBs based-LFIA also had excellent specificity, stability, and accuracy verified by clinical samples. SIGNIFICANCE: This study illustrates the first introduction of PVP and carboxyl PEG to prepare InP nanobeads after the nanobeads formed with emulsion evaporation, which avoided the method of silica encapsulation leading to the fluorescence quench. The InP nanobeads retains the fluorescence and their stability was greatly improved. Compared to other point-of-care test (POCT) assay, the developed InP QBs based-LFIA achieves lower detection limits with excellent specificity, stability, especially accuracy, which shows great application prospects for POCT kits.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Quantum DotsPhosphinesIndiumPolymersImmunoassayHumansLimit of DetectionNatriuretic Peptide, BrainLuminescenceC-Reactive Protein

Stichwörter der Autor:innen

Fluorescent nanobeadsInPLateral flow immunoassayMultifunctional polymerOne-pot approach

Substanzen

PhosphinesIndiumindium phosphidePolymersNatriuretic Peptide, BrainC-Reactive Protein

Autor:innen und Institutionen

  • Henan Province Engineering Technology Research Center of Rapid-Accuracy Medical Diagnostics, Department of Clinical Laboratory, The First Affiliated Hospital of Henan University, Kaifeng, 475004, China; Key Lab for Spec…
  • Key Lab for Special Functional Materials of Ministry of Education, School of Nanoscience and Materials Engineering, And National and Local Joint Engineering Research Center for High-Efficiency Display and Lighting Techn…
  • Henan Province Engineering Technology Research Center of Rapid-Accuracy Medical Diagnostics, Department of Clinical Laboratory, The First Affiliated Hospital of Henan University, Kaifeng, 475004, China.
  • Henan Province Engineering Technology Research Center of Rapid-Accuracy Medical Diagnostics, Department of Clinical Laboratory, The First Affiliated Hospital of Henan University, Kaifeng, 475004, China. Electronic addre…

Förderung

  • National Natural Science Foundation of China
  • Henan Provincial Science and Technology Research Project

Zitieren

APA

Chen, X., Zheng, Q., Li, X., Wang, L., Zhang, L., Zhang, Y., Wang, L., Lv, Y., Li, L. S., & Wu, R. (2026). One-pot fabrication of highly stable and luminescent InP quantum dots nanobeads through multifunctional polymer encapsulation for lateral flow immunoassay. Analytica Chimica Acta, 1383, 344924. https://doi.org/10.1016/j.aca.2025.344924

Vancouver

Chen X, Zheng Q, Li X, Wang L, Zhang L, Zhang Y, et al. One-pot fabrication of highly stable and luminescent InP quantum dots nanobeads through multifunctional polymer encapsulation for lateral flow immunoassay. Analytica Chimica Acta. 2026;1383:344924. doi:10.1016/j.aca.2025.344924

BibTeX
@article{Chen2026,
  author = {Chen, Xinxin and Zheng, Qingbiao and Li, Xiaoquan and Wang, Li and Zhang, Lifang and Zhang, Yuxin and Wang, Lei and Lv, Yanbing and Li, Lin Song and Wu, Ruili},
  title = {One-pot fabrication of highly stable and luminescent InP quantum dots nanobeads through multifunctional polymer encapsulation for lateral flow immunoassay},
  journal = {Analytica Chimica Acta},
  year = {2026},
  volume = {1383},
  pages = {344924},
  doi = {10.1016/j.aca.2025.344924}
}
Kostenlos starten →