EUVIMEDEUVIMED entdecken
Crossref

3D printed microplasma optical emission spectrometry coupled with ZIF-8 based dispersive solid-phase extraction for field analysis of waterborne arsenic

Jiahui Yang, Yao Lin, Xi Wang, Yuanyuan Li, Yurong Deng, Chengbin Zheng

Analytica Chimica Acta · 2024-11 · 1330 · 343270

DOI: 10.1016/j.aca.2024.343270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytica Chimica Acta, 2024-11. Verfasst von Jiahui Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Analytical & Testing Center, Sichuan University, Chengdu, Sichuan, 610064, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: Arsenic contamination of drinking water has become a public health challenge over the world, particularly in Bangladesh, India, and China. Compared to the most used field test kits of waterborne arsenic, miniature microplasma atomic spectrometry retains advantages of accuracy, elemental specificity, and less matrix interference. Despite increased interest in arsenic detection by using miniature microplasma spectrometry, the improvements of its analytical performance, manufacturing cost and consistency still remain significant challenges. RESULTS: Herein, a miniature, battery-operated, and integrated hydride generation point discharge optical emission spectrometer (HG-μPD-OES, 116 mm length × 92 mm width × 104 mm height) was printed with a simple 3D printer and used for the highly sensitive and element-specific determination of arsenic by coupling to a dispersive solid-phase extraction (d-SPE) using zeolitic imidazolate framework-8 as adsorbent. The d-SPE simplifies sample treatment, significantly alleviates the interference arising from transition metal ions and improves sensitivity. A LOD of 0.07 μg L-1 for arsenic was obtained with relative standard deviations (RSDs, n = 11) better than 3.8 %. SIGNIFICANCE: The 3D printing technique significantly improves the manufacturing cost and fabricating consistency of HG-μPD-OES. LOD were remarkably improved 27-fold compared to those obtained by conventional HG-μPD-OES, providing a promising method for the reliable, sensitive, and convenient field analysis of waterborne arsenic even its concentration as low as 0.2 μg L-1. The practicability and accuracy of the proposed method have been successfully verified via the field analysis of waterborne arsenic in a Certified Reference Material (GBW(E)080390) and a series of river and lake water samples.

Schlagwörter

Stichwörter der Autor:innen

3D printingDispersive solid-phase extractionField analysisMicroplasma optical emission spectrometryPoint dischargewaterborne arsenic

Autor:innen und Institutionen

  • Analytical & Testing Center, Sichuan University, Chengdu, Sichuan, 610064, China.
  • West China School of Basic Medical Sciences & Forensic Medicine, Sichuan University, Chengdu, Sichuan, 610041, China.
  • Key Laboratory of Green Chemistry & Technology of MOE, College of Chemistry, Sichuan University, Chengdu, Sichuan, 610064, China.
  • Key Laboratory of Green Chemistry & Technology of MOE, College of Chemistry, Sichuan University, Chengdu, Sichuan, 610064, China. Electronic address: abinscu@scu.edu.cn.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, J., Lin, Y., Wang, X., Li, Y., Deng, Y., & Zheng, C. (2024). 3D printed microplasma optical emission spectrometry coupled with ZIF-8 based dispersive solid-phase extraction for field analysis of waterborne arsenic. Analytica Chimica Acta, 1330, 343270. https://doi.org/10.1016/j.aca.2024.343270

Vancouver

Yang J, Lin Y, Wang X, Li Y, Deng Y, Zheng C. 3D printed microplasma optical emission spectrometry coupled with ZIF-8 based dispersive solid-phase extraction for field analysis of waterborne arsenic. Analytica Chimica Acta. 2024;1330:343270. doi:10.1016/j.aca.2024.343270

BibTeX
@article{Yang2024,
  author = {Yang, Jiahui and Lin, Yao and Wang, Xi and Li, Yuanyuan and Deng, Yurong and Zheng, Chengbin},
  title = {3D printed microplasma optical emission spectrometry coupled with ZIF-8 based dispersive solid-phase extraction for field analysis of waterborne arsenic},
  journal = {Analytica Chimica Acta},
  year = {2024},
  volume = {1330},
  pages = {343270},
  doi = {10.1016/j.aca.2024.343270}
}
Kostenlos starten →