EUVIMEDEUVIMED entdecken
Crossref

Control-risk-informed spectrum-power allocation for virtual coupling of heavy-haul trains

Fan Yue, Li Zhe, Li Wei, Liu Biao, Nie Xiaobo

Accident Analysis & Prevention · 2026-12 · 238 · 108784

DOI: 10.1016/j.aap.2026.108784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Accident Analysis & Prevention, 2026-12. Verfasst von Fan Yue und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Traffic & Transportation Engineering, Central South University, Changsha 410075, China. Electronic address: 234201001@csu.edu.cn. Hauptthemen laut MEDLINE: Transportation. Die Arbeit nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heavy-haul train virtual coupling requires spectrum-power allocation that protects both packet-level quality of service (QoS) and the freshness of train-control commands. This paper proposes CRISP, a control-risk-informed spectrum-power allocation method implemented on a low-band OFDMA resource-grid abstraction. The method combines a double deep Q-network with TCS-prioritized replay, feasible-action filtering, and guard-band fallback. A timestamped command-age state is propagated across packet, resource-allocation, and train-control clocks, and a physics-calibrated communication-induced control-degradation index combines spacing error, velocity error, and command staleness. Under the reference tunnel stress condition (four trains, four schedulable RBs, adjacent-channel leakage coefficient 0.1), CRISP reduces the TCS QoS violation rate to 0.8085 (SD 0.0112), compared with 0.9912 (SD 0.0111) for Vanilla-DDQN and 0.8548 (SD 0.0170) for Guard-Band-Greedy. Mean TCS command age is reduced to 94.0 ms from 1566.4 ms and 377.8 ms, respectively; no degradation event is observed and the mean minimum braking margin remains 987.5 m. Ablation, learning-convergence, decision-latency, and emergency-outage experiments identify the contribution and boundary of each module. Because the reference condition is intentionally communication-stressed, the results demonstrate degradation mitigation rather than field reliability certification or a formal safety guarantee.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TransportationAlgorithms

Stichwörter der Autor:innen

Command ageControl-degradation indexDeep reinforcement learningHeavy-haul trainOFDMASpectrum-power allocationVirtual coupling

Autor:innen und Institutionen

  • School of Traffic & Transportation Engineering, Central South University, Changsha 410075, China. Electronic address: 234201001@csu.edu.cn.
  • School of Electrical Engineering, Beijing Jiaotong University, Beijing 100044, China. Electronic address: 24121298@bjtu.edu.cn.
  • School of Traffic & Transportation Engineering, Central South University, Changsha 410075, China. Electronic address: liweijt@csu.edu.cn.
  • School of Electrical Engineering, Beijing Jiaotong University, Beijing 100044, China. Electronic address: liubiao@bjtu.edu.cn.
  • School of Electrical Engineering, Beijing Jiaotong University, Beijing 100044, China. Electronic address: xbnie@bjtu.edu.cn.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yue, F., Zhe, L., Wei, L., Biao, L., & Xiaobo, N. (2026). Control-risk-informed spectrum-power allocation for virtual coupling of heavy-haul trains. Accident Analysis & Prevention, 238, 108784. https://doi.org/10.1016/j.aap.2026.108784

Vancouver

Yue F, Zhe L, Wei L, Biao L, Xiaobo N. Control-risk-informed spectrum-power allocation for virtual coupling of heavy-haul trains. Accident Analysis & Prevention. 2026;238:108784. doi:10.1016/j.aap.2026.108784

BibTeX
@article{Yue2026,
  author = {Yue, Fan and Zhe, Li and Wei, Li and Biao, Liu and Xiaobo, Nie},
  title = {Control-risk-informed spectrum-power allocation for virtual coupling of heavy-haul trains},
  journal = {Accident Analysis & Prevention},
  year = {2026},
  volume = {238},
  pages = {108784},
  doi = {10.1016/j.aap.2026.108784}
}
Kostenlos starten →