Stabilizing perovskite solar cells for space applications
Watt · 2026
DOI: 10.1007/s44503-026-00020-2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Watt, 2026. Verfasst von Leyu Bi und 7 weiteren Autor:innen. Die Arbeit nennt 173 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Research Grant Council of Hong Kong Special Administrative Region, China, Guangdong Provincial Science and Technology Program, Research Grant Council of Hong Kong.
Abstract (Originalsprache)
Perovskite solar cells (PSCs) offer transformative potential for space photovoltaics with exceptional specific power (up to 50,000 W/kg without encapsulation), tunable bandgaps for high-efficiency tandems (> 35% for perovskite/Si, > 31% for all-perovskite), intrinsic radiation self-healing and low-temperature solution processing. These attributes enable dramatic reductions in launch mass and cost for satellite constellations, space stations, orbital computing centers, space solar power station (SSPS) and deep-space probes. However, the extreme space environment: high-temperature illumination (AM0, 90 °C > 25,000 h in 5-year LEO missions), intense thermal cycling (− 100 ℃ to + 100 °C, > 25,000 cycles in 5-year LEO missions), high-flux UV (10 W/m2 UV-B, 45 W/m2 UV-A), proton irradiation (50–250 keV), vacuum and atomic oxygen demands far exceeding stability requirements for terrestrial applications. This review systematically analyzes two core bottlenecks: temperature stability and radiation stability. For thermal challenges, we detailly discuss failure mechanisms (interfacial stress, phase transitions, ion migration) and advances made in compositional engineering, transport-layer regulation, inorganic interfaces, additives, CTE-matched substrates, and encapsulation. For radiation tolerance, we analyze UV-induced degradation and mitigation via down-conversion layers, NiOx/SAM engineering, all-inorganic compositions, and dynamic additives, alongside proton damage mechanisms and countermeasures, including self-healing, tandem electrical shielding, and high-Z additives. Ground-based simulation frameworks and testing platforms are evaluated, highlighting pathways toward standardized space protocols. This review provides a comprehensive roadmap for realizing long-lifetime, high-reliability perovskite space photovoltaics.
Förderung
- Research Grant Council of Hong Kong Special Administrative Region, China
- Guangdong Provincial Science and Technology Program
- Research Grant Council of Hong Kong
- Innovation and Technology Commission of Hong Kong
- Innovation and Technology Commission of the Hong Kong SAR
- City University of Hong Kong
- Research Grants Council of Hong Kong
- National Natural Science Foundation of China
Zitieren
APA
Bi, L., Zeng, C., Liang, J., Wang, J., Zhang, X., Liu, J., Yip, H., & Jen, A. K. (2026). Stabilizing perovskite solar cells for space applications. Watt. https://doi.org/10.1007/s44503-026-00020-2
Vancouver
Bi L, Zeng C, Liang J, Wang J, Zhang X, Liu J, et al. Stabilizing perovskite solar cells for space applications. Watt. 2026. doi:10.1007/s44503-026-00020-2
BibTeX
@article{Bi2026,
author = {Bi, Leyu and Zeng, Cheng and Liang, Jiehui and Wang, Jiarong and Zhang, Xiaobin and Liu, Jiye and Yip, Hin-Lap and Jen, Alex K.-Y.},
title = {Stabilizing perovskite solar cells for space applications},
journal = {Watt},
year = {2026},
doi = {10.1007/s44503-026-00020-2}
}
EUVIMED