A workflow for residual stress control in laser powder bed fusion manufacturing
Advanced Materials Joining · 31.07.2026 · 1 (1)
DOI: 10.1007/s44500-026-00007-y ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Joining, online erschienen am 31.07.2026. Verfasst von Shixiang Zhou und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 325 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Singapore Ministry of Education Academic Research Fund Tier 1 Grant.
Abstract (Originalsprache)
Laser powder bed fusion (LPBF) enables near-net-shape manufacturing of complex metal components with exceptional geometric freedom. However, the rapid cyclic heating and cooling inherent to the process generates steep thermal gradients and plastic incompatibility, resulting in the accumulation of high residual stresses within printed components. These residual stresses can drive distortion and cracking, degrade fatigue performance, and reduce dimensional accuracy. Most existing studies attempt to mitigate residual stress using isolated approaches, which complicates their translation into robust manufacturing practice. This review therefore organizes residual stress mitigation into a system-level workflow spanning simulation, process optimization, material-level control, and post-treatment management. Multiscale simulation approaches can be employed to identify the dominant contributors to residual stress, thereby guiding the selection of in-process mitigation strategies and geometry design, including process parameter optimization, scan pattern and sequence design, and structural design. Material-level strategies, such as powder reuse governance, process atmosphere control, transformation engineering, and in situ alloying, are complementary approaches for stabilizing processing conditions and improving the consistency between simulation predictions and practical manufacturing environments. Post-treatment approaches, including stress-relief heat treatment, vibration-based methods, and surface peening techniques, can be further applied to achieve application-oriented residual stress control. These strategies should operate within a closed-loop framework in which experimental measurements are continuously fed back into the model to enable calibration and iterative refinement of process strategies. The integrated workflow proposed in this review provides a practical framework for residual-stress-controlled LPBF manufacturing, facilitating the transition from laboratory-scale optimization toward reliable and repeatable industrial production.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Singapore Ministry of Education Academic Research Fund Tier 1 Grant
Zitieren
APA
Zhou, S., Guo, Q., Li, M., Wang, Q., Xu, X., Chang, S., Yan, W., Li, L., & Ding, J. (2026). A workflow for residual stress control in laser powder bed fusion manufacturing. Advanced Materials Joining, 1(1). https://doi.org/10.1007/s44500-026-00007-y
Vancouver
Zhou S, Guo Q, Li M, Wang Q, Xu X, Chang S, et al. A workflow for residual stress control in laser powder bed fusion manufacturing. Advanced Materials Joining. 2026;1(1). doi:10.1007/s44500-026-00007-y
BibTeX
@article{Zhou2026,
author = {Zhou, Shixiang and Guo, Qichen and Li, Mingchuan and Wang, Qishun and Xu, Xin and Chang, Shuai and Yan, Wentao and Li, Liqun and Ding, Jun},
title = {A workflow for residual stress control in laser powder bed fusion manufacturing},
journal = {Advanced Materials Joining},
year = {2026},
volume = {1},
number = {1},
doi = {10.1007/s44500-026-00007-y}
}
EUVIMED