Characterization of vulcanized polyhydroxyalkanoate composites filled with calcium carbonate
Discover Polymers · 31.10.2026 · 3 (1)
DOI: 10.1007/s44347-026-00075-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Discover Polymers, online erschienen am 31.10.2026. Verfasst von Phimthong Khamjapo und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: New Energy and Industrial Technology Development Organization.
Abstract (Originalsprache)
Polyhydroxyalkanoates (PHAs) are bio-based plastics produced by bacterial fermentation from renewable resources. PHAs with unsaturated bonds can undergo post-biosynthetic chemical modification or crosslinking to improve material properties. Previous studies have demonstrated that sulfur-vulcanized PHAs exhibited rubber-like properties and increased toughness. On the other hand, it is also important to add inexpensive fillers, such as calcium carbonate (CaCO3), to reduce the amount of expensive resins required. This study investigated vulcanized PHA with varying CaCO3 loadings (0, 10, 30, and 50 per hundred resin, phr) in a sulfur vulcanization system consisting of zinc oxide, stearic acid, 2-mercaptobenzothiazole, and sulfur. First, poly(3-hydroxybutyrate-co-3-hydroxy-5-hexenoate) [P(3HB-co-3H5HE)] was biosynthesized using recombinant Escherichia coli, yielding a copolymer with a 3H5HE fraction of 47 mol%. The effects of CaCO3 content on the physical properties of the vulcanized PHA copolymers were evaluated. The results indicate that 10 phr loading of CaCO3 slightly increased tensile strength and toughness, whereas 50 phr CaCO3 loading maximized elongation at break and Young’s modulus. Also, the tensile set of vulcanized PHA copolymers slightly increased from 8% to 10% after 200% elongation with the incorporation of CaCO3, suggesting reduced elastic recovery.
Förderung
- New Energy and Industrial Technology Development Organization
Zitieren
APA
Khamjapo, P., Miyahara, Y., & Tsuge, T. (2026). Characterization of vulcanized polyhydroxyalkanoate composites filled with calcium carbonate. Discover Polymers, 3(1). https://doi.org/10.1007/s44347-026-00075-3
Vancouver
Khamjapo P, Miyahara Y, Tsuge T. Characterization of vulcanized polyhydroxyalkanoate composites filled with calcium carbonate. Discover Polymers. 2026;3(1). doi:10.1007/s44347-026-00075-3
BibTeX
@article{Khamjapo2026,
author = {Khamjapo, Phimthong and Miyahara, Yuki and Tsuge, Takeharu},
title = {Characterization of vulcanized polyhydroxyalkanoate composites filled with calcium carbonate},
journal = {Discover Polymers},
year = {2026},
volume = {3},
number = {1},
doi = {10.1007/s44347-026-00075-3}
}
EUVIMED