EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation-based design of a pulse modulator for a 6 MeV medical LINAC using LTspice

Teguh Handoyo, Ira Palupi, Galih Setiaji, Teguh Firmansyah

Discover Electronics · 16.04.2026 · 3 (1)

DOI: 10.1007/s44291-026-00208-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Discover Electronics, online erschienen am 16.04.2026. Verfasst von Teguh Handoyo und 3 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and LTspice-based simulation of a pulse modulator for a 6 MeV medical linear accelerator (LINAC). The proposed circuit model integrates the key subsystems of the modulator, including the pulse forming network (PFN), switching stage, pulse transformer, and a simplified klystron load representation, enabling circuit-level evaluation of the pulse generation process. Simulation results show that the modulator can generate high-voltage pulses with a peak voltage of approximately 125 kV and a peak current of about 85 A. The resulting waveform exhibits rise and fall times of 1.1 µs and 1.6 µs, respectively, with a flat-top duration of approximately 5.05 µs at a repetition rate of 200 Hz. These pulse characteristics are consistent with the operational requirements of a 6 MeV medical LINAC. The results demonstrate the feasibility of the proposed modulator configuration at the circuit-simulation level and provide insight into the transient behavior of the integrated pulsed power system under simulated operating conditions, offering a useful reference for the preliminary design and analysis of high-voltage modulators for medical LINAC applications.

Zitieren

APA

Handoyo, T., Palupi, I., Setiaji, G., & Firmansyah, T. (2026). Simulation-based design of a pulse modulator for a 6 MeV medical LINAC using LTspice. Discover Electronics, 3(1). https://doi.org/10.1007/s44291-026-00208-9

Vancouver

Handoyo T, Palupi I, Setiaji G, Firmansyah T. Simulation-based design of a pulse modulator for a 6 MeV medical LINAC using LTspice. Discover Electronics. 2026;3(1). doi:10.1007/s44291-026-00208-9

BibTeX
@article{Handoyo2026,
  author = {Handoyo, Teguh and Palupi, Ira and Setiaji, Galih and Firmansyah, Teguh},
  title = {Simulation-based design of a pulse modulator for a 6 MeV medical LINAC using LTspice},
  journal = {Discover Electronics},
  year = {2026},
  volume = {3},
  number = {1},
  doi = {10.1007/s44291-026-00208-9}
}
Kostenlos starten →