Finite element analysis and empirical design models for the flexural capacity of reinforced concrete beams enclosing smooth and perforated cold formed sections
Discover Civil Engineering · 24.04.2026 · 3 (1)
DOI: 10.1007/s44290-026-00472-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Discover Civil Engineering, online erschienen am 24.04.2026. Verfasst von Mohamed Eldeib und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the flexural behavior of reinforced concrete beams encasing smooth and perforated cold-formed steel (CFS) sections. A comprehensive three-dimensional nonlinear finite element (FE) model was developed in ANSYS to simulate the load–deflection response and ultimate capacity of composite beams. Validation against experimental results showed that discrepancies in ultimate load and mid-span deflection were within ± 7%. A parametric study assessed the influence of CFS thickness, height, and configurations (back-to-back, front-to-front, U, and n-shapes). Results revealed that increasing CFS thickness and height significantly enhanced stiffness and ultimate load. While perforations slightly reduced the ultimate capacity in some cases, they significantly improved ductility through enhanced mechanical interlock. Finally, high-order polynomial empirical design models (Z-K and Z-M equations) were proposed to predict the ultimate load enhancement ratio (Z) with high correlation (R 2 > 0.97). These formulas, validated for thickness ratios (K) up to 4% and height ratios (M) up to 0.9, provide a reliable and practical tool for the preliminary design and optimization of composite beams within these geometric limits.
Zitieren
APA
Eldeib, M., Khalil, N., Abou‑Rayan, A., & Kamal, A. Y. (2026). Finite element analysis and empirical design models for the flexural capacity of reinforced concrete beams enclosing smooth and perforated cold formed sections. Discover Civil Engineering, 3(1). https://doi.org/10.1007/s44290-026-00472-4
Vancouver
Eldeib M, Khalil N, Abou‑Rayan A, Kamal AY. Finite element analysis and empirical design models for the flexural capacity of reinforced concrete beams enclosing smooth and perforated cold formed sections. Discover Civil Engineering. 2026;3(1). doi:10.1007/s44290-026-00472-4
BibTeX
@article{Eldeib2026,
author = {Eldeib, Mohamed and Khalil, Nader and Abou‑Rayan, Ashraf and Kamal, Ahmed Youssef},
title = {Finite element analysis and empirical design models for the flexural capacity of reinforced concrete beams enclosing smooth and perforated cold formed sections},
journal = {Discover Civil Engineering},
year = {2026},
volume = {3},
number = {1},
doi = {10.1007/s44290-026-00472-4}
}
EUVIMED