EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Enhancing high-temperature resistance of electrophoretic coatings through cerium oxide incorporation

Liyang Chen, Yumeng Yang, Xinyi Jiang, Ping Zhang, Yang Zhang, Hanxue Ye, Benfeng Zhu, Jiao Liu, Li Jiang, Guoying Wei

Surface Science and Technology · 2026-12 · 4 (1)

DOI: 10.1007/s44251-026-00155-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Science and Technology, online erschienen am 12.08.2026. Verfasst von Liyang Chen und 9 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Science Foundation of Zhejiang Province, Hangzhou Key Scientific Research Program, Fundamental Research Funds for the Provincial Universities of Zhejiang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrophoretic paints, by virtue of their low cost, straightforward processing and excellent resistance to weathering and pollution, have found extensive application across a wide range of industries. However, their applications are limited by poor thermal stability. To address these issues, this study investigated the preparation and properties of electrophoretic paint/CeO2 composite coatings fabricated through a one-step electrophoretic deposition method, focusing on the impact of cerium acetate concentration and different cerium compounds (cerium acetate versus CeO2 nanoparticles) on coating performance. Results revealed that, relative to neat electrophoretic coatings, the addition of cerium compounds markedly improved thermal stability, corrosion resistance and autonomous self-healing capability. The optimal concentration of cerium acetate was determined to be between 0.001 and 0.01 M, within which the coatings exhibited uniform and dense surfaces. Higher concentrations led to particle agglomeration and surface defects. The addition of cerium acetate increased the char yield from 36.13% to 55.54% at 800 °C and reduced the corrosion current density by a factor of ten. Additionally, the coatings demonstrated self-healing capabilities, with cracks healing following thermal treatment at 200 °C. Flame retardancy was also improved, demonstrated by a reduction in the peak heat release rate from 340.9 W/g to 240.6 W/g. In summary, cerium acetate was found to be more effective than CeO2 nanoparticles in enhancing coating performance. These enhancements make electrophoretic paint/CeO2 composite coatings highly suitable for high-temperature applications.

Förderung

  • Natural Science Foundation of Zhejiang Province
  • Hangzhou Key Scientific Research Program
  • Fundamental Research Funds for the Provincial Universities of Zhejiang
  • Science and Technology Program of the State Administration for Market Regulation of China
  • National Natural Science Foundation of China

Zitieren

APA

Chen, L., Yang, Y., Jiang, X., Zhang, P., Zhang, Y., Ye, H., Zhu, B., Liu, J., Jiang, L., & Wei, G. (2026). Enhancing high-temperature resistance of electrophoretic coatings through cerium oxide incorporation. Surface Science and Technology, 4(1). https://doi.org/10.1007/s44251-026-00155-3

Vancouver

Chen L, Yang Y, Jiang X, Zhang P, Zhang Y, Ye H, et al. Enhancing high-temperature resistance of electrophoretic coatings through cerium oxide incorporation. Surface Science and Technology. 2026;4(1). doi:10.1007/s44251-026-00155-3

BibTeX
@article{Chen2026,
  author = {Chen, Liyang and Yang, Yumeng and Jiang, Xinyi and Zhang, Ping and Zhang, Yang and Ye, Hanxue and Zhu, Benfeng and Liu, Jiao and Jiang, Li and Wei, Guoying},
  title = {Enhancing high-temperature resistance of electrophoretic coatings through cerium oxide incorporation},
  journal = {Surface Science and Technology},
  year = {2026},
  volume = {4},
  number = {1},
  doi = {10.1007/s44251-026-00155-3}
}
Kostenlos starten →