Meta material unit-cell design and orientation effects in conductive fused filament formed polymer for EMI shielding effectiveness
Discover Materials · 04.06.2026 · 6 (1)
DOI: 10.1007/s43939-026-00720-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Discover Materials, online erschienen am 04.06.2026. Verfasst von Mahalingam Nainaragaram Ramasamy und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Materials and Technologies for Sustainable Development within the OP JAK financed by the European Union (EU) and the State Budget of Czech Republic.
Abstract (Originalsprache)
Electromagnetic shielding performance in additively manufactured conductive polymers is strongly dependent on geometry; however, the influence of unit-cell orientation in meta-structures remains insufficiently quantified in microwave conditions. In this work, a polyhedral metamaterial unit cell is designed in conductive PLA–carbon black and fabricated as WR-90-compatible shielding inserts by periodic tiling in four orientations, namely Variants 1–4. Shielding effectiveness is measured experimentally over 8.2–12.4 GHz and benchmarked against full-wave electromagnetic simulations. Despite identical outer dimensions, the four variants exhibit distinctly different responses, ranging from ~ 20 to 70 dB. Notably, Variants 1 and 2 have nearly identical mass (< 2% difference) yet differ by ~ 25 dB across the band, demonstrating an orientation-dominated effect beyond material quantity. This behaviour indicates that orientation governs attenuation primarily through increased effective propagation path length and geometry-induced impedance modulation. Variant 2 provides the highest broadband shielding (~ 50–70 dB), whereas Variant 3 yields the lowest (~ 16–31 dB). Discrepancies between simulation and measurement are mainly due to uncertainties in the bulk material approximation and print-induced geometric deviations.
Förderung
- Materials and Technologies for Sustainable Development within the OP JAK financed by the European Union (EU) and the State Budget of Czech Republic
Zitieren
APA
Ramasamy, M. N., Sliva, A., Sankar, S. S., Kovar, S., & Gona, S. (2026). Meta material unit-cell design and orientation effects in conductive fused filament formed polymer for EMI shielding effectiveness. Discover Materials, 6(1). https://doi.org/10.1007/s43939-026-00720-5
Vancouver
Ramasamy MN, Sliva A, Sankar SS, Kovar S, Gona S. Meta material unit-cell design and orientation effects in conductive fused filament formed polymer for EMI shielding effectiveness. Discover Materials. 2026;6(1). doi:10.1007/s43939-026-00720-5
BibTeX
@article{Ramasamy2026,
author = {Ramasamy, Mahalingam Nainaragaram and Sliva, Ales and Sankar, Subramaniam Saravana and Kovar, Stanislav and Gona, Stanislav},
title = {Meta material unit-cell design and orientation effects in conductive fused filament formed polymer for EMI shielding effectiveness},
journal = {Discover Materials},
year = {2026},
volume = {6},
number = {1},
doi = {10.1007/s43939-026-00720-5}
}
EUVIMED