Guide for Navigating 3D-Printed Cortical Bone Trajectory Screws in Situations with Previously Instrumented Pedicle Screws
Indian Journal of Orthopaedics · 2026-06 · 60 (6) · 1545-1554
DOI: 10.1007/s43465-026-01764-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Indian Journal of Orthopaedics, online erschienen am 25.03.2026. Verfasst von Wei-Che Tai und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics Surgery, Bone and Joint Research Center, Chang Gung Memorial Hospital, Chang Gung University, No. 5, Fu-Shin Street, Kweish…. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chang Gung Memorial Hospital, Linkou.
Abstract (Originalsprache)
Purpose
Traditional surgical interventions for adjacent segment disease (ASD) repair commonly mandate the exposure of all pre-existing hardware. Cortical bone trajectory (CBT) screws have been innovated to amplify the contact surface between the screw and cortical bone, offering a promising approach to mitigate the challenge sassociated with traditional ASD repair surgeries.
Methods
In this study, a tangible manifestation of the cortical bone trajectory screw navigation guide was produced by utilizing a 3D printer to facilitate the insertion of cortical bone trajectory screws. A comprehensive set of radiographic images and computed tomography scans was gathered to evaluate the accuracy of K-wire through CBT screw guide inside the vertebrae which was previously implanted with a pedicle screw.
Results
The variance in the K-pin circle centre distance before and after surgery ranges from 0.2 mm to 3.54 mm. The K-pin angle difference falls within the range of 0.4° to 5.8° in the sagittal plane, ranges from 1.46° to 1.7° in the transverse plane.
Conclusion
This research process has successfully yielded a navigation guide that holds promise for inserting CBT screw even with previously pedicle screw at the same vertebrae.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Orthopedics Surgery, Bone and Joint Research Center, Chang Gung Memorial Hospital, Chang Gung University, No. 5, Fu-Shin Street, Kweishian, Taoyuan, 333 Taiwan.
ORCID-Profile: Jen-Chung Liao
Förderung
- Chang Gung Memorial Hospital, Linkou
Zitieren
APA
Tai, W. C., & Liao, J. C. (2026). Guide for Navigating 3D-Printed Cortical Bone Trajectory Screws in Situations with Previously Instrumented Pedicle Screws. Indian Journal of Orthopaedics, 60(6), 1545-1554. https://doi.org/10.1007/s43465-026-01764-8
Vancouver
Tai WC, Liao JC. Guide for Navigating 3D-Printed Cortical Bone Trajectory Screws in Situations with Previously Instrumented Pedicle Screws. Indian Journal of Orthopaedics. 2026;60(6):1545-1554. doi:10.1007/s43465-026-01764-8
BibTeX
@article{Tai2026,
author = {Tai, Wei-Che and Liao, Jen-Chung},
title = {Guide for Navigating 3D-Printed Cortical Bone Trajectory Screws in Situations with Previously Instrumented Pedicle Screws},
journal = {Indian Journal of Orthopaedics},
year = {2026},
volume = {60},
number = {6},
pages = {1545--1554},
doi = {10.1007/s43465-026-01764-8}
}
EUVIMED