EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cu addition on microstructure, wear, and corrosion resistance of AlCoCrFeNiSi0.5Cux (x = 0.01, 0.05, 0.1) high-entropy alloys

Rafał Babilas, Mariola Kądziołka-Gaweł, Anna Bajorek, Piotr Gębara, Adrian Radoń, Tymon Warski, Oktawian Bialas, Monika Spilka, Wojciech Łoński, Katarzyna Młynarek-Żak

Archives of Civil and Mechanical Engineering · 10.12.2024 · 25 (1)

DOI: 10.1007/s43452-024-01102-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Civil and Mechanical Engineering, online erschienen am 10.12.2024. Verfasst von Rafał Babilas und 9 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowe Centrum Nauki.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of copper addition on the structure and selected properties of AlCoCrFeNiSi 0.5 Cu x high-entropy alloys is described. Slowly cooled ingots were prepared by induction melting, and the samples in the form of plates were obtained by pressure casting. The conducted structural studies confirmed the presence of BCC/B2 phase. Microsegregation in the ingots was associated with the formation of intermetallic Cr 3 Si and Fe 5 Si 3 phases. An increase in the cooling rate stopped segregation by reducing the mobility of Cr and Si. The hyperfine magnetic field distributions indicated the formation of the BCC Fe(Co,Ni,Si,Cr) solid solution for alloys in the form of plates. The lowest corrosion-current density (0.04 μA/cm 2 ) in 3.5%-NaCl solution was obtained for the plate with the lowest copper content. The dominated aluminum surface states for the post-corrosive plates highlighted the binding energies of Al 2 O 3 . A tendency of reduced coercivity with increased copper content was observed. The positive effect of copper addition on wear resistance was confirmed for the AlCoCrFeNiSi 0.5 Cu 0.1 alloy.

Förderung

  • Narodowe Centrum Nauki

Zitieren

APA

Babilas, R., Kądziołka-Gaweł, M., Bajorek, A., Gębara, P., Radoń, A., Warski, T., Bialas, O., Spilka, M., Łoński, W., & Młynarek-Żak, K. (2024). Effect of Cu addition on microstructure, wear, and corrosion resistance of AlCoCrFeNiSi0.5Cux (x = 0.01, 0.05, 0.1) high-entropy alloys. Archives of Civil and Mechanical Engineering, 25(1). https://doi.org/10.1007/s43452-024-01102-5

Vancouver

Babilas R, Kądziołka-Gaweł M, Bajorek A, Gębara P, Radoń A, Warski T, et al. Effect of Cu addition on microstructure, wear, and corrosion resistance of AlCoCrFeNiSi0.5Cux (x = 0.01, 0.05, 0.1) high-entropy alloys. Archives of Civil and Mechanical Engineering. 2024;25(1). doi:10.1007/s43452-024-01102-5

BibTeX
@article{Babilas2024,
  author = {Babilas, Rafał and Kądziołka-Gaweł, Mariola and Bajorek, Anna and Gębara, Piotr and Radoń, Adrian and Warski, Tymon and Bialas, Oktawian and Spilka, Monika and Łoński, Wojciech and Młynarek-Żak, Katarzyna},
  title = {Effect of Cu addition on microstructure, wear, and corrosion resistance of AlCoCrFeNiSi0.5Cux (x = 0.01, 0.05, 0.1) high-entropy alloys},
  journal = {Archives of Civil and Mechanical Engineering},
  year = {2024},
  volume = {25},
  number = {1},
  doi = {10.1007/s43452-024-01102-5}
}
Kostenlos starten →