EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis of fibrous dicalcium silicate from waste glass through the hydrothermal method

Yu-Hsun Chen, Cheng-Han Lee

Journal of the Korean Ceramic Society · 2026-07 · 63 (4) · 557-573

DOI: 10.1007/s43207-026-00596-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Korean Ceramic Society, online erschienen am 06.03.2026. Verfasst von Yu-Hsun Chen und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Cheng Kung University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Belite cement (BC), which contains dicalcium silicate (C2S) as its main mineral phase, has attracted increased attention due to several advantages, including a lower calcination temperature, a lower heat of hydration, and higher long-term strength. However, low hydration reaction rates and inadequate early-age strength necessitate improving C2S by tailoring it into a fibrous morphology. Commonly, the synthesis of fibrous C2S has depended on costly silicon sources, such as high-purity quartz powder and silica aerogels. To solve this issue, the fibrous C2S was synthesized via the hydrothermal method using silica, tempered glass, and container glass in the present study. When tempered and container glass were utilized as silicon sources, a ball-milling pretreatment was required to reduce their particle size first. The silicon sources were mixed with water to form a slurry, which was then subjected to hydrothermal treatment. Upon completion of the hydrothermal process, the resulting material was calcined to yield C2S. In this research, the parameters of the ball milling procedure, including the ball-to-material ratio, milling speed, and milling time, were investigated to obtain particles below 200 mesh. Moreover, the calcium-to-silicon ratio, water-to-solid ratio, and calcination temperature were also determined in the hydrothermal process. The results indicate that ball-to-material ratios of 5:1 and 10:1 at 160 rpm for 12 h were optimal for tempered glass and container glass, respectively, during ball milling. On the other hand, the optimal fibrous C2S synthesis parameters for each silicon source were found to vary, reflecting the distinct characteristics of the glass types used.

Förderung

  • National Cheng Kung University

Zitieren

APA

Chen, Y., & Lee, C. (2026). Synthesis of fibrous dicalcium silicate from waste glass through the hydrothermal method. Journal of the Korean Ceramic Society, 63(4), 557-573. https://doi.org/10.1007/s43207-026-00596-4

Vancouver

Chen Y, Lee C. Synthesis of fibrous dicalcium silicate from waste glass through the hydrothermal method. Journal of the Korean Ceramic Society. 2026;63(4):557-573. doi:10.1007/s43207-026-00596-4

BibTeX
@article{Chen2026,
  author = {Chen, Yu-Hsun and Lee, Cheng-Han},
  title = {Synthesis of fibrous dicalcium silicate from waste glass through the hydrothermal method},
  journal = {Journal of the Korean Ceramic Society},
  year = {2026},
  volume = {63},
  number = {4},
  pages = {557--573},
  doi = {10.1007/s43207-026-00596-4}
}
Kostenlos starten →