A novel biochar-based 3D composite for ultrafast and selective Cr(VI) removal in electroplating wastewater
Biochar · 16.05.2024 · 6 (1)
DOI: 10.1007/s42773-024-00338-x ↗Kurz gefasst
Fachartikel in der Zeitschrift Biochar, online erschienen am 16.05.2024. Verfasst von Zongzheng Yang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, National Natural Science Foundation of China, GDAS' Project of Science and Technology Development.
Abstract (Originalsprache)
In this study, a newly developed composite of biochar-poly( m -phenylenediamine) (BC-P m PD) exhibiting a distinct skeletal structure was synthesized for the purpose of extracting Cr(VI) from aqueous solutions. BC was employed as a supportive carrier onto which P m PD nanoparticles were uniformly affixed through in - situ polymerization and oxidation synthesis, both within and outside the layered configuration of BC. The structural stability and morphologies of BC-P m PD were assessed utilizing Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy, thermogravimetric analysis, analysis of specific surface area and pore size, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction. In comparison to other modified BCs reported, BC-P m PD exhibited the highest Cr(VI) removal rate. Specifically, at 303 K, BC-P m PD achieved a maximum Cr(VI) removal capacity of 775 mg g −1 , surpassing the capabilities of unmodified BC and P m PD by 10.4 and 2.13 times, respectively. Analyses involving XPS, FTIR, and density functional theory calculation confirmed that proton transfer happened between protonated amine (−NH 2 ) functional group within the structure of BC-P m PD and HCrO 4 − before the formation of hydrogen bond. Subsequently, environmentally persistent free radicals facilitated the reduction of the adsorbed Cr(VI). Quantification of the functional groups indicated that the amino group was responsible for 93.0% of the Cr(VI) adsorption in BC-P m PD. BC-P m PD displayed potent adsorption and reduction capabilities, alongside notable stability, repeatability, and promising potential for application in the remediation for high concentrations of Cr(VI) in electroplating wastewater scenarios. Graphical Abstract
Förderung
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology
- National Natural Science Foundation of China
- GDAS' Project of Science and Technology Development
Zitieren
APA
Yang, Z., Wang, J., Zhao, N., Pang, R., Zhao, C., Deng, Y., Yang, D., Jiang, H., Wu, Z., & Qiu, R. (2024). A novel biochar-based 3D composite for ultrafast and selective Cr(VI) removal in electroplating wastewater. Biochar, 6(1). https://doi.org/10.1007/s42773-024-00338-x
Vancouver
Yang Z, Wang J, Zhao N, Pang R, Zhao C, Deng Y, et al. A novel biochar-based 3D composite for ultrafast and selective Cr(VI) removal in electroplating wastewater. Biochar. 2024;6(1). doi:10.1007/s42773-024-00338-x
BibTeX
@article{Yang2024,
author = {Yang, Zongzheng and Wang, Jinjin and Zhao, Nan and Pang, Runyi and Zhao, Chuanfang and Deng, Ying and Yang, Di and Jiang, Haochen and Wu, Zhiguo and Qiu, Rongliang},
title = {A novel biochar-based 3D composite for ultrafast and selective Cr(VI) removal in electroplating wastewater},
journal = {Biochar},
year = {2024},
volume = {6},
number = {1},
doi = {10.1007/s42773-024-00338-x}
}
EUVIMED