Highly Perforated ZnO-Loaded Poly (Lactic Acid) Nanofibers Fabricated via Humidity-Controlled Self-Assembly Electrospinning for Inactivation of Airborne Pathogens
Advanced Fiber Materials · 2026-12 · 8 (6) · 2328-2344
DOI: 10.1007/s42765-026-00728-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Fiber Materials, online erschienen am 19.06.2026. Verfasst von Jeong Rae Kim und 5 weiteren Autor:innen. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Machinery and Materials, Ministry of Trade, Industry and Energy.
Abstract (Originalsprache)
Self-disinfecting fibrous filters that combine high pathogen capture capability, intrinsic antimicrobial activity, durability, and energy-lean fabrication remain difficult to realize. This is mainly because antimicrobial functionality often requires post-treatment to expose active sites, which can compromise durability and reduce energy efficiency, and increase process complexity. Herein, a one-step, humidity-assisted electrospinning strategy that exploits the breath-figure effect to generate highly perforated ZnO/poly(lactic acid) nanofibers (HP-ZnO/PLA NFs) with ZnO preferentially exposed along pore walls is reported. Relative humidity (RH, 20%-60%) served as a direct process variable coupling textural porosity and Zn surface coverage: with increasing RH, the specific surface area increased from 0.64 to 10.92 m2 g−1, the Zn-covered surface atomic fraction increased from 24.2% to 44.9%, and the effective accessible ZnO area from 0.16 to 4.89 m2 g−1. The filters prepared at 60% RH achieved ≥ 96.8% filtration efficiency and ≥ 90.0% inactivation against Staphylococcus aureus, Escherichia coli, influenza A (H1N1), and human coronaviruses 229E and OC43. The filters also show negligible particle shedding (< 0.02 particles cm−3) and a low functionalization-specific energy consumption (approximately 0.17 kWh m−2), yielding an energy-normalized figure of merit of 23.5 logs per kWh m−2. These results indicate that the proposed strategy represents a scalable route for preparing durable, self-disinfecting air-filter media for indoor mitigation of airborne pathogens.
Förderung
- Korea Institute of Machinery and Materials
- Ministry of Trade, Industry and Energy
Zitieren
APA
Kim, J. R., Kim, Y., Lee, G., Han, B., Hwang, J., & Park, D. H. (2026). Highly Perforated ZnO-Loaded Poly (Lactic Acid) Nanofibers Fabricated via Humidity-Controlled Self-Assembly Electrospinning for Inactivation of Airborne Pathogens. Advanced Fiber Materials, 8(6), 2328-2344. https://doi.org/10.1007/s42765-026-00728-9
Vancouver
Kim JR, Kim Y, Lee G, Han B, Hwang J, Park DH. Highly Perforated ZnO-Loaded Poly (Lactic Acid) Nanofibers Fabricated via Humidity-Controlled Self-Assembly Electrospinning for Inactivation of Airborne Pathogens. Advanced Fiber Materials. 2026;8(6):2328-2344. doi:10.1007/s42765-026-00728-9
BibTeX
@article{Kim2026,
author = {Kim, Jeong Rae and Kim, Younghun and Lee, Gunhee and Han, Bangwoo and Hwang, Jungho and Park, Dae Hoon},
title = {Highly Perforated ZnO-Loaded Poly (Lactic Acid) Nanofibers Fabricated via Humidity-Controlled Self-Assembly Electrospinning for Inactivation of Airborne Pathogens},
journal = {Advanced Fiber Materials},
year = {2026},
volume = {8},
number = {6},
pages = {2328--2344},
doi = {10.1007/s42765-026-00728-9}
}
EUVIMED