EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental investigation on emission optimization of a diesel engine fueled with used temple oil methyl ester at different injection pressures

Sharanabasappa Saddu, Sangamesh B. Kivade, M. Nagamadhu, Kapilan Natesan, Sadashiva Prabhu S

Discover Applied Sciences · 17.11.2026

DOI: 10.1007/s42452-026-09830-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Discover Applied Sciences, online erschienen am 17.11.2026. Verfasst von Sharanabasappa Saddu und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Manipal Academy of Higher Education, Manipal.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodiesel recognized as a renewable energy source, is increasingly considered a viable alternative to diesel in internal combustion engines. Given the cultural and religious significance of Used Temple Oil (UTO) in India, there is a growing interest in utilizing UTO as a feedstock for biodiesel production. This study aims to investigate the effect of injection pressure on the emission characteristics of a diesel engine fueled with biodiesel derived from Used Temple Oil (UTO), while also evaluating key parameters to determine the lower emissions. The biodiesel was produced through a transesterification process, and its fuel properties were assessed according to ASTM standards. Emission and performance tests were conducted on a 4-stroke, direct-injection diesel engine at injection pressures of 180, 200, and 220 bar, under various load conditions. The results revealed that CO and HC emissions were significantly reduced with the B20 biodiesel blend, especially at 200 bar injection pressure, with model R 2 values of 97.95% and 95.96%, respectively. However, NO x emissions and smoke opacity were slightly higher compared to diesel, with NO x having an R 2 value of 99.81%, indicating a strong dependence on engine load. Smoke opacity exhibited a similar trend, with a model R 2 of 97.85%. These findings highlight the critical role of injection pressure and engine load in controlling emissions when using UTOME in diesel engines. Intermediate injection pressure resulted in reduced HC, CO and NO x emissions as revealed from regression analysis.

Förderung

  • Manipal Academy of Higher Education, Manipal

Zitieren

APA

Saddu, S., Kivade, S. B., Nagamadhu, M., Natesan, K., & S, S. P. (2026). Experimental investigation on emission optimization of a diesel engine fueled with used temple oil methyl ester at different injection pressures. Discover Applied Sciences. https://doi.org/10.1007/s42452-026-09830-4

Vancouver

Saddu S, Kivade SB, Nagamadhu M, Natesan K, S SP. Experimental investigation on emission optimization of a diesel engine fueled with used temple oil methyl ester at different injection pressures. Discover Applied Sciences. 2026. doi:10.1007/s42452-026-09830-4

BibTeX
@article{Saddu2026,
  author = {Saddu, Sharanabasappa and Kivade, Sangamesh B. and Nagamadhu, M. and Natesan, Kapilan and S, Sadashiva Prabhu},
  title = {Experimental investigation on emission optimization of a diesel engine fueled with used temple oil methyl ester at different injection pressures},
  journal = {Discover Applied Sciences},
  year = {2026},
  doi = {10.1007/s42452-026-09830-4}
}
Kostenlos starten →