EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Top electrode materials for semi-transparent perovskite solar cells: A review

Ram Datt, Hind Alsayyed, Shivani Dhall, Sonal Gupta, Swati Bishnoi, Ramashankar Gupta, Sandeep Arya, Trystan Watson, Wing Chung Tsoi

Discover Applied Sciences · 07.11.2025 · 7 (11)

DOI: 10.1007/s42452-025-07883-5 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Discover Applied Sciences, online erschienen am 07.11.2025. Verfasst von Ram Datt und 8 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Science and Engineering, SPECIFIC, Swansea University, Bay Campus, Fabian Way, Swansea, SA1 8EN UK. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC, European Social Fund via the Welsh Government, Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rising demand for renewable energy solutions has accelerated interest in semi-transparent solar cells (STSCs) for emerging applications such as building-integrated photovoltaic, automotive systems, and wearable electronics. Perovskite solar cells (PSCs) show considerable promise as STSCs due to their high performance, cost-effectiveness, solution processability, compatibility with flexible substrates, and transparency of perovskite films. Collaborative efforts have been directed towards developing transparent top electrodes (TTEs) and device architectures for PSCs to enhance the performance and transparency. The choice of top electrode materials significantly influences the performance and transparency of semi-transparent perovskite solar cells (STPSCs). Various materials such as dielectric/metal/dielectric (DMD) layers, metal thin film, metal nanowires, transparent conducting oxide (TCO), conductive polymers (e.g., PEDOT: PSS), graphene, and carbon nanotubes have been identified as potential TTEs. TCO, DMD, and metal thin film electrodes typically require sputtering or thermal deposition methods; others are solution-processable. The material selection and thickness of the top electrode play crucial roles in improving both the efficiency and transparency of PSC devices, posing challenges in optimising device performance while maintaining high transparency. This review comprehensively covers the essential material characteristics required for top electrodes in STPSCs; surveys reported top electrode materials and discusses their characterisation, stability, scalability, current challenges, and prospects.

Schlagwörter

Stichwörter der Autor:innen

Perovskite solar cellsSemi-transparent solar cellsTransparent top electrode

Autor:innen und Institutionen

  • Faculty of Science and Engineering, SPECIFIC, Swansea University, Bay Campus, Fabian Way, Swansea, SA1 8EN UK.
  • Department of Physics, DAV College, Jalandhar, 144008 Punjab India.
  • Department of Chemistry and The Institute for Lasers, Photonics, and Biophotonics, University at Buffalo, SUNY, Buffalo, New York 14260 USA.
  • Department of Chemical Engineering, Indian Institute of Technology, Delhi, New Delhi, 110016 India.
  • Advanced Materials and Metrology Division, CSIR-National Physical Laboratory, New Delhi, 110012 India.
  • Department of Physics, University of Jammu, Jammu, 180006 Jammu and Kashmir India.

Förderung

  • EPSRC
  • European Social Fund via the Welsh Government
  • Engineering and Physical Sciences Research Council
  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Datt, R., Alsayyed, H., Dhall, S., Gupta, S., Bishnoi, S., Gupta, R., Arya, S., Watson, T., & Tsoi, W. C. (2025). Top electrode materials for semi-transparent perovskite solar cells: A review. Discover Applied Sciences, 7(11). https://doi.org/10.1007/s42452-025-07883-5

Vancouver

Datt R, Alsayyed H, Dhall S, Gupta S, Bishnoi S, Gupta R, et al. Top electrode materials for semi-transparent perovskite solar cells: A review. Discover Applied Sciences. 2025;7(11). doi:10.1007/s42452-025-07883-5

BibTeX
@article{Datt2025,
  author = {Datt, Ram and Alsayyed, Hind and Dhall, Shivani and Gupta, Sonal and Bishnoi, Swati and Gupta, Ramashankar and Arya, Sandeep and Watson, Trystan and Tsoi, Wing Chung},
  title = {Top electrode materials for semi-transparent perovskite solar cells: A review},
  journal = {Discover Applied Sciences},
  year = {2025},
  volume = {7},
  number = {11},
  doi = {10.1007/s42452-025-07883-5}
}
Kostenlos starten →