EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring effects of supplementary cementitious materials on setting time, strength, and microscale properties of mortar

Lenin Miguel Bendezu Romero, Alireza Bahrami, Paul O. Awoyera, Oluwapamilerin Fadire, Alan Yordan Valdivieso Velarde, Md Azree Othuman Mydin, Krishna Prakash Arunachalam

Discover Applied Sciences · 01.11.2024 · 6 (11)

DOI: 10.1007/s42452-024-06180-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift Discover Applied Sciences, online erschienen am 01.11.2024. Verfasst von Lenin Miguel Bendezu Romero und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Gävle.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The concept of sustainability has become a crucial concern for safeguarding the planet. The current research has focused on developing affordable and eco-friendly mortar by using industrial wastes. This study explores the use of fly ash (FA) and ground granulated blast furnace slag (GGBFS), byproducts of steelmaking and coal burning, in mortar production. It examines their impacts on the compressive strength and setting times, when utilizing varying proportions of the materials. The study also evaluates water requirements for the workability, thus demonstrating the sustainability of these waste products in construction. The cementitious materials were employed in finely ground form and were replaced with further tertiary mixes including both supplements at 10%, 30%, and 50% of each. The mixtures were allowed to cure for 7, 14, and 28 days by immersion in water. The results showed improvements in the compressive strength of mortar samples incorporating FA and GGBFS at various curing ages. However, the water requirement and workability of mortar samples were altered as a result of utilizing these supplementary cementitious materials (SCMs). These findings will serve as a standard for environmentally responsible mortar using GGBFS and/or FA as SCMs.

Förderung

  • University of Gävle

Zitieren

APA

Romero, L. M. B., Bahrami, A., Awoyera, P. O., Fadire, O., Velarde, A. Y. V., Mydin, M. A. O., & Arunachalam, K. P. (2024). Exploring effects of supplementary cementitious materials on setting time, strength, and microscale properties of mortar. Discover Applied Sciences, 6(11). https://doi.org/10.1007/s42452-024-06180-x

Vancouver

Romero LMB, Bahrami A, Awoyera PO, Fadire O, Velarde AYV, Mydin MAO, et al. Exploring effects of supplementary cementitious materials on setting time, strength, and microscale properties of mortar. Discover Applied Sciences. 2024;6(11). doi:10.1007/s42452-024-06180-x

BibTeX
@article{Romero2024,
  author = {Romero, Lenin Miguel Bendezu and Bahrami, Alireza and Awoyera, Paul O. and Fadire, Oluwapamilerin and Velarde, Alan Yordan Valdivieso and Mydin, Md Azree Othuman and Arunachalam, Krishna Prakash},
  title = {Exploring effects of supplementary cementitious materials on setting time, strength, and microscale properties of mortar},
  journal = {Discover Applied Sciences},
  year = {2024},
  volume = {6},
  number = {11},
  doi = {10.1007/s42452-024-06180-x}
}
Kostenlos starten →