EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corner cutting accuracy for thin-walled CFRPC parts using HS-WEDM

Mohamed AbouHawa, Abeer Eissa

Discover Applied Sciences · 13.03.2024 · 6 (3)

DOI: 10.1007/s42452-024-05766-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Discover Applied Sciences, online erschienen am 13.03.2024. Verfasst von Mohamed AbouHawa und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science, Technology & Innovation Funding Authority (STDF) in cooperation with Egyptian Knowledge Bank, Minufiya University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon Fiber-Reinforced polymer (CFRP) composite parts with thin-walled corners are in great demand in aircraft, cars, and precision instruments. Nonetheless, the fabrication of these parts is difficult due to their low stiffness. High-speed WEDM is an advanced technique for cutting thin CFRP components as it is a non-contact method for removing materials. Nonetheless, testing results demonstrate an unavoidable deformation in the thin-walled corners of the CFRP composite. The objective of this study is to improve the accuracy of corners in thin-walled CFRP composite parts. The research utilized a Taguchi L 16 orthogonal array to investigate the influence of various process parameters, including pulse-on duration ( P on ), pulse-off duration ( P off ), and input current ( I ), as well as the parameter CFRP plate thickness ( T ), on corner inaccuracy. The CFRP thickness varied between 0.5, 1.0, 1.5, and 2.0 mm, and the corner angles examined were 30°, 60°, 90°, and 120°. Additionally, a second-order polynomial regression model was used to determine the correlation between the process parameters and corner inaccuracy at various corner angles. Also, a multi-response optimization technique using a composite desirability coupled with a generalized reduced gradient were used to find the optimal process combination across various CFRP thicknesses. According to the research findings, the most relevant process parameters impacting corner accuracy at different angles were the pulse-on duration and input current. To achieve accurate corners with different angles, the optimal process parameters were identified: P on (40µs), P off (15µs), and I (4A) for CFRP thicknesses 0.5 and 1.0mm, and P on (45μs), P off (30μs), and I (2A) for thicknesses 1.5 and 2.0mm.

Förderung

  • Science, Technology & Innovation Funding Authority (STDF) in cooperation with Egyptian Knowledge Bank
  • Minufiya University

Zitieren

APA

AbouHawa, M., & Eissa, A. (2024). Corner cutting accuracy for thin-walled CFRPC parts using HS-WEDM. Discover Applied Sciences, 6(3). https://doi.org/10.1007/s42452-024-05766-9

Vancouver

AbouHawa M, Eissa A. Corner cutting accuracy for thin-walled CFRPC parts using HS-WEDM. Discover Applied Sciences. 2024;6(3). doi:10.1007/s42452-024-05766-9

BibTeX
@article{AbouHawa2024,
  author = {AbouHawa, Mohamed and Eissa, Abeer},
  title = {Corner cutting accuracy for thin-walled CFRPC parts using HS-WEDM},
  journal = {Discover Applied Sciences},
  year = {2024},
  volume = {6},
  number = {3},
  doi = {10.1007/s42452-024-05766-9}
}
Kostenlos starten →