EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic modeling and simulation of mass, momentum, and energy transfer in a single-screw plastic extrusion process

Fabian Luna, Juan C. Maya, Farid Chejne

Multiscale and Multidisciplinary Modeling, Experiments and Design · 2026-12 · 9 (1)

DOI: 10.1007/s41939-026-01181-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Multiscale and Multidisciplinary Modeling, Experiments and Design, online erschienen am 19.03.2026. Verfasst von Fabian Luna und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Departamento Administrativo de Ciencia, Tecnología e Innovación, National University of Colombia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Modeling single-screw extrusion processes is essential for process optimization, yet existing comprehensive models are either computationally expensive or limited to steady-state conditions, hindering their use for dynamic scenario evaluation and offline optimization studies. This study presents a dynamic 1D model (spatial discretization along the axial screw direction) that integrates mass, momentum, and energy balances across all key extrusion zones—solids conveying, melting, melt conveying, and die flow—in a fully coupled framework where all balance equations are solved simultaneously. The model was implemented for a conventional screw geometry with smooth feed section using upwind finite difference schemes, resulting in a differential–algebraic equation (DAE) system validated against experimental data from an industrial extruder processing polypropylene (PP). The model achieves high predictive accuracy with Mean Absolute Error (MAE) values of 7.45 $$\times$$ × 10 −6 m 2 for solid flow area, 0.51–8.96 bar for pressure, and 1.66 °C for melt temperature, while maintaining computational efficiency with simulation times of 625–875 s (simulation-to-real-time ratios of 2.7:1 to 6.7:1). As far as we know, this is the first dynamic 1D model providing transient predictions across process zones in a unified framework, overcoming the steady-state limitations of previous comprehensive models. This balance between accuracy and computational speed enables offline process optimization, parametric studies, and sensitivity analysis for process engineers, production engineers, and researchers. Additionally, its potential as a generator of synthetic data for the training of machine learning models positions it as a tool for developing soft sensors and advanced control strategies with reduced sensor requirements. Graphical abstract

Förderung

  • Departamento Administrativo de Ciencia, Tecnología e Innovación
  • National University of Colombia

Zitieren

APA

Luna, F., Maya, J. C., & Chejne, F. (2026). Dynamic modeling and simulation of mass, momentum, and energy transfer in a single-screw plastic extrusion process. Multiscale and Multidisciplinary Modeling, Experiments and Design, 9(1). https://doi.org/10.1007/s41939-026-01181-2

Vancouver

Luna F, Maya JC, Chejne F. Dynamic modeling and simulation of mass, momentum, and energy transfer in a single-screw plastic extrusion process. Multiscale and Multidisciplinary Modeling, Experiments and Design. 2026;9(1). doi:10.1007/s41939-026-01181-2

BibTeX
@article{Luna2026,
  author = {Luna, Fabian and Maya, Juan C. and Chejne, Farid},
  title = {Dynamic modeling and simulation of mass, momentum, and energy transfer in a single-screw plastic extrusion process},
  journal = {Multiscale and Multidisciplinary Modeling, Experiments and Design},
  year = {2026},
  volume = {9},
  number = {1},
  doi = {10.1007/s41939-026-01181-2}
}
Kostenlos starten →