EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Single-Shot Surface Topography Measurement Using Two-Color Fluorescence

Masaki Michihata, Saeko Fujii, Shuzo Masui, Satoru Takahashi

Nanomanufacturing and Metrology · 2026-12 · 9 (1)

DOI: 10.1007/s41871-026-00302-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomanufacturing and Metrology, online erschienen am 22.05.2026. Verfasst von Masaki Michihata und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science London, Machine Tool Engineering Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A single-shot surface topography measurement technique based on two-color laser-induced fluorescence is proposed for in situ and on-machine applications. In fluorescence intensity-based measurements, the spatial nonuniformity of the excitation light often degrades the measurement accuracy. To address these issues, the proposed technique uses the intensity ratio of two fluorescence emission bands generated by mixed fluorescent dyes with spectral reabsorption characteristics. The measurement principle is theoretically formulated, and its robustness against variations in the surface material and illumination conditions is analyzed. A scanless single-shot optical measurement system employing a color CMOS camera is developed, enabling full-field surface topography acquisition in a single exposure. Calibration is performed using a reference step height without requiring precise knowledge of optical parameters. The experimental results demonstrate that the proposed two-color fluorescence technique suppresses apparent height errors within approximately ± 0.5 µm. Measurements of flat and structured surfaces confirm improved robustness and applicability to microscale surface topography measurement under practical manufacturing conditions.

Förderung

  • Japan Society for the Promotion of Science London
  • Machine Tool Engineering Foundation

Zitieren

APA

Michihata, M., Fujii, S., Masui, S., & Takahashi, S. (2026). Single-Shot Surface Topography Measurement Using Two-Color Fluorescence. Nanomanufacturing and Metrology, 9(1). https://doi.org/10.1007/s41871-026-00302-2

Vancouver

Michihata M, Fujii S, Masui S, Takahashi S. Single-Shot Surface Topography Measurement Using Two-Color Fluorescence. Nanomanufacturing and Metrology. 2026;9(1). doi:10.1007/s41871-026-00302-2

BibTeX
@article{Michihata2026,
  author = {Michihata, Masaki and Fujii, Saeko and Masui, Shuzo and Takahashi, Satoru},
  title = {Single-Shot Surface Topography Measurement Using Two-Color Fluorescence},
  journal = {Nanomanufacturing and Metrology},
  year = {2026},
  volume = {9},
  number = {1},
  doi = {10.1007/s41871-026-00302-2}
}
Kostenlos starten →