X-ray microtomography and automated classification methods to quantify recycling effects on a modified AA7050 additive manufacturing alloy
Progress in Additive Manufacturing · 20.11.2026
DOI: 10.1007/s40964-026-02078-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 20.11.2026. Verfasst von Daniel Sinclair und 3 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Laser powder bed fusion (LPBF) offers near-net shaping and lower per-part costs compared to casting. Lower costs depend partly on the recyclability of LPBF feedstock powder, which is only selectively melted and can be recollected and reused. As particles are spattered, condensed, or segregated by laser heat, it is essential that reliable sieving and mixing methods are used to maintain consistent feedstock characteristics. The effects of printing, sieving, and mixing on aluminum alloy feedstock powder were characterized by three-dimensional (3D) x-ray microscopy, which was used to classify individual particles in repeatedly recycled powder. Contrary to previous recycling studies using 2D microscopy and sieve analysis to measure powder populations, a tomography-based approach showed a decrease in median particle diameter after each recycling step. By examining classified particles, we found that elongated and flattened particles with dimensions above the sieve size were retained in the virgin condition then gradually removed by repeated recycling. The tomography analysis is presented, alongside electron microscopy characterization of elemental segregation, to thoroughly describe the recyclability of a unique AM alloy and demonstrate the interpretability of tomography-based powder analysis in the context of powder metallurgy.
Zitieren
APA
Sinclair, D., Ganju, E., Torbati-Sarraf, H., & Chawla, N. (2026). X-ray microtomography and automated classification methods to quantify recycling effects on a modified AA7050 additive manufacturing alloy. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-026-02078-9
Vancouver
Sinclair D, Ganju E, Torbati-Sarraf H, Chawla N. X-ray microtomography and automated classification methods to quantify recycling effects on a modified AA7050 additive manufacturing alloy. Progress in Additive Manufacturing. 2026. doi:10.1007/s40964-026-02078-9
BibTeX
@article{Sinclair2026,
author = {Sinclair, Daniel and Ganju, Eshan and Torbati-Sarraf, Hamid and Chawla, Nikhilesh},
title = {X-ray microtomography and automated classification methods to quantify recycling effects on a modified AA7050 additive manufacturing alloy},
journal = {Progress in Additive Manufacturing},
year = {2026},
doi = {10.1007/s40964-026-02078-9}
}
EUVIMED